Daily Papers

Models of human feedback for AI alignment, such as those underpinning Direct Preference Optimization (DPO), often bake in a singular, static set of preferences, limiting adaptability. This paper challenges the assumption of monolithic preferences by introducing Configurable Preference Tuning (CPT), a novel framework for endowing language models with the ability to dynamically adjust their behavior based on explicit, human-interpretable directives. CPT leverages synthetically generated preference data, conditioned on system prompts derived from structured, fine-grained rubrics that define desired attributes like writing style. By fine-tuning with these rubric-guided preferences, the LLM learns to modulate its outputs at inference time in response to the system prompt, without retraining. This approach not only offers fine-grained control but also provides a mechanism for modeling more nuanced and context-dependent human feedback. Several experimental artifacts, such as training code, generated datasets and fine-tuned models are released at https://github.com/vicgalle/configurable-preference-tuning

Recent studies on large language model (LLM) reasoning capabilities have demonstrated promising improvements in model performance by leveraging a lengthy thinking process and additional computational resources during inference, primarily in tasks involving mathematical reasoning (Muennighoff et al., 2025). However, it remains uncertain if longer reasoning chains inherently enhance factual accuracy, particularly beyond mathematical contexts. In this work, we thoroughly examine LLM reasoning within complex open-domain question-answering (QA) scenarios. We initially distill reasoning traces from advanced, large-scale reasoning models (QwQ-32B and DeepSeek-R1-671B), then fine-tune a variety of models ranging from smaller, instruction-tuned variants to larger architectures based on Qwen2.5. To enrich reasoning traces, we introduce factual information from knowledge graphs in the form of paths into our reasoning traces. Our experimental setup includes four baseline approaches and six different instruction-tuned models evaluated across a benchmark of six datasets, encompassing over 22.6K questions. Overall, we carry out 168 experimental runs and analyze approximately 1.7 million reasoning traces. Our findings indicate that, within a single run, smaller reasoning models achieve noticeable improvements in factual accuracy compared to their original instruction-tuned counterparts. Moreover, our analysis demonstrates that adding test-time compute and token budgets factual accuracy consistently improves by 2-8%, further confirming the effectiveness of test-time scaling for enhancing performance and consequently improving reasoning accuracy in open-domain QA tasks. We release all the experimental artifacts for further research.

Despite widespread adoption, the impact of AI tools on software development in the wild remains understudied. We conduct a randomized controlled trial (RCT) to understand how AI tools at the February-June 2025 frontier affect the productivity of experienced open-source developers. 16 developers with moderate AI experience complete 246 tasks in mature projects on which they have an average of 5 years of prior experience. Each task is randomly assigned to allow or disallow usage of early 2025 AI tools. When AI tools are allowed, developers primarily use Cursor Pro, a popular code editor, and Claude 3.5/3.7 Sonnet. Before starting tasks, developers forecast that allowing AI will reduce completion time by 24%. After completing the study, developers estimate that allowing AI reduced completion time by 20%. Surprisingly, we find that allowing AI actually increases completion time by 19%--AI tooling slowed developers down. This slowdown also contradicts predictions from experts in economics (39% shorter) and ML (38% shorter). To understand this result, we collect and evaluate evidence for 20 properties of our setting that a priori could contribute to the observed slowdown effect--for example, the size and quality standards of projects, or prior developer experience with AI tooling. Although the influence of experimental artifacts cannot be entirely ruled out, the robustness of the slowdown effect across our analyses suggests it is unlikely to primarily be a function of our experimental design.

Shojaee et al. (2025) report that Large Reasoning Models (LRMs) exhibit "accuracy collapse" on planning puzzles beyond certain complexity thresholds. We demonstrate that their findings primarily reflect experimental design limitations rather than fundamental reasoning failures. Our analysis reveals three critical issues: (1) Tower of Hanoi experiments systematically exceed model output token limits at reported failure points, with models explicitly acknowledging these constraints in their outputs; (2) The authors' automated evaluation framework fails to distinguish between reasoning failures and practical constraints, leading to misclassification of model capabilities; (3) Most concerningly, their River Crossing benchmarks include mathematically impossible instances for N > 5 due to insufficient boat capacity, yet models are scored as failures for not solving these unsolvable problems. When we control for these experimental artifacts, by requesting generating functions instead of exhaustive move lists, preliminary experiments across multiple models indicate high accuracy on Tower of Hanoi instances previously reported as complete failures. These findings highlight the importance of careful experimental design when evaluating AI reasoning capabilities.

Machine learning models are increasingly deployed in high-stakes domains, raising concerns about both privacy and fairness. Differential Privacy (DP) has become a gold standard for privacy-preserving data analysis, while fairness-aware mechanisms aim to mitigate discrimination against underrepresented groups. However, these objectives can conflict: DP often amplifies disparities across demographic groups, and little is known about whether established fairness interventions remain effective under DP constraints. In this work, we present, to our knowledge, the first systematic evaluation of fairness interventions on differentially private synthetic tabular data. Our benchmark centers on the Adaptive Iterative Mechanism (AIM), identified as the state-of-the-art marginal-based DP synthesizer (Cormode et al. 2025). We thus evaluate fairness interventions across four datasets, multiple group fairness metrics, and three categories of mitigation strategies (pre-processing, in-processing, and post-processing) under a wide range of privacy budgets. We compare four pipeline configurations: (Baseline) training on original data; (DP-only) training on DP synthetic data; (Fair-only) applying fairness mechanisms on original data; and (DP+Fair) combining fairness mechanisms with DP synthetic data. Our results demonstrate that while DP alone can degrade both utility and fairness, applying fairness interventions can partially restore equitable outcomes. Among them, post-processing methods tend to provide more stable fairness-utility trade-offs across privacy budgets and synthesizers, achieving strong fairness improvements while preserving competitive utility relative to other intervention stages. We release all code, data, and experimental artifacts in an open-source repository to ensure full reproducibility and to support future research on the privacy-fairness-utility trade-off.

Building a virtual cell capable of accurately simulating cellular behaviors in silico has long been a dream in computational biology. We introduce CellFlux, an image-generative model that simulates cellular morphology changes induced by chemical and genetic perturbations using flow matching. Unlike prior methods, CellFlux models distribution-wise transformations from unperturbed to perturbed cell states, effectively distinguishing actual perturbation effects from experimental artifacts such as batch effects -- a major challenge in biological data. Evaluated on chemical (BBBC021), genetic (RxRx1), and combined perturbation (JUMP) datasets, CellFlux generates biologically meaningful cell images that faithfully capture perturbation-specific morphological changes, achieving a 35% improvement in FID scores and a 12% increase in mode-of-action prediction accuracy over existing methods. Additionally, CellFlux enables continuous interpolation between cellular states, providing a potential tool for studying perturbation dynamics. These capabilities mark a significant step toward realizing virtual cell modeling for biomedical research. Project page: https://yuhui-zh15.github.io/CellFlux/.

Scientific reasoning in materials science requires integrating multimodal experimental evidence with underlying physical theory. Existing benchmarks make it difficult to assess whether incorporating visual experimental data during post-training improves mechanism-grounded explanation reasoning beyond text-only supervision. We introduce MATRIX, a multimodal benchmark for materials science reasoning that evaluates foundational theory, research-level reasoning, and the interpretation of real experimental artifacts across multiple characterization modalities. Using MATRIX as a controlled diagnostic, we isolate the effect of visual grounding by comparing post-training on structured materials science text alone with post-training that incorporates paired experimental images. Despite using relatively small amounts of multimodal data, visual supervision improves experimental interpretation by 10-25% and yields 5-16% gains on text-only scientific reasoning tasks. Our results demonstrate that these improvements rely on correct image-text alignment during post-training, highlighting cross-modal representational transfer. We also observe consistent improvements on ScienceQA and PubMedQA, demonstrating that the benefits of structured multimodal post-training extend beyond materials science. The MATRIX dataset is available at https://huggingface.co/datasets/radical-ai/MATRIX and the model at https://huggingface.co/radical-ai/MATRIX-PT.

Scientific researchers frequently use the in situ synchrotron high-energy powder X-ray diffraction (XRD) technique to examine the crystallographic structures of materials in functional devices such as rechargeable battery materials. We propose a method for identifying artifacts in experimental XRD images. The proposed method uses deep learning convolutional neural network architectures, such as tunable U-Nets to identify the artifacts. In particular, the predicted artifacts are evaluated against the corresponding ground truth (manually implemented) using the overall true positive rate or recall. The result demonstrates that the U-Nets can consistently produce great recall performance at 92.4% on the test dataset, which is not included in the training, with a 34% reduction in average false positives in comparison to the conventional method. The U-Nets also reduce the time required to identify and separate artifacts by more than 50%. Furthermore, the exclusion of the artifacts shows major changes in the integrated 1D XRD pattern, enhancing further analysis of the post-processing XRD data.

Generative adversarial network (GAN) based vocoders have achieved significant attention in speech synthesis with high quality and fast inference speed. However, there still exist many noticeable spectral artifacts, resulting in the quality decline of synthesized speech. In this work, we adopt a novel GAN-based vocoder designed for few artifacts and high fidelity, called FA-GAN. To suppress the aliasing artifacts caused by non-ideal upsampling layers in high-frequency components, we introduce the anti-aliased twin deconvolution module in the generator. To alleviate blurring artifacts and enrich the reconstruction of spectral details, we propose a novel fine-grained multi-resolution real and imaginary loss to assist in the modeling of phase information. Experimental results reveal that FA-GAN outperforms the compared approaches in promoting audio quality and alleviating spectral artifacts, and exhibits superior performance when applied to unseen speaker scenarios.

Despite the remarkable success of diffusion models in image generation, slow sampling remains a persistent issue. To accelerate the sampling process, prior studies have reformulated diffusion sampling as an ODE/SDE and introduced higher-order numerical methods. However, these methods often produce divergence artifacts, especially with a low number of sampling steps, which limits the achievable acceleration. In this paper, we investigate the potential causes of these artifacts and suggest that the small stability regions of these methods could be the principal cause. To address this issue, we propose two novel techniques. The first technique involves the incorporation of Heavy Ball (HB) momentum, a well-known technique for improving optimization, into existing diffusion numerical methods to expand their stability regions. We also prove that the resulting methods have first-order convergence. The second technique, called Generalized Heavy Ball (GHVB), constructs a new high-order method that offers a variable trade-off between accuracy and artifact suppression. Experimental results show that our techniques are highly effective in reducing artifacts and improving image quality, surpassing state-of-the-art diffusion solvers on both pixel-based and latent-based diffusion models for low-step sampling. Our research provides novel insights into the design of numerical methods for future diffusion work.

Deepfake speech attribution remains challenging for existing solutions. Classifier-based solutions often fail to generalize to domain-shifted samples, and watermarking-based solutions are easily compromised by distortions like codec compression or malicious removal attacks. To address these issues, we propose FakeMark, a novel watermarking framework that injects artifact-correlated watermarks associated with deepfake systems rather than pre-assigned bitstring messages. This design allows a detector to attribute the source system by leveraging both injected watermark and intrinsic deepfake artifacts, remaining effective even if one of these cues is elusive or removed. Experimental results show that FakeMark improves generalization to cross-dataset samples where classifier-based solutions struggle and maintains high accuracy under various distortions where conventional watermarking-based solutions fail.

JPEG, as a widely used image compression standard, often introduces severe visual artifacts when achieving high compression ratios. Although existing deep learning-based restoration methods have made considerable progress, they often struggle to recover complex texture details, resulting in over-smoothed outputs. To overcome these limitations, we propose SODiff, a novel and efficient semantic-oriented one-step diffusion model for JPEG artifacts removal. Our core idea is that effective restoration hinges on providing semantic-oriented guidance to the pre-trained diffusion model, thereby fully leveraging its powerful generative prior. To this end, SODiff incorporates a semantic-aligned image prompt extractor (SAIPE). SAIPE extracts rich features from low-quality (LQ) images and projects them into an embedding space semantically aligned with that of the text encoder. Simultaneously, it preserves crucial information for faithful reconstruction. Furthermore, we propose a quality factor-aware time predictor that implicitly learns the compression quality factor (QF) of the LQ image and adaptively selects the optimal denoising start timestep for the diffusion process. Extensive experimental results show that our SODiff outperforms recent leading methods in both visual quality and quantitative metrics. Code is available at: https://github.com/frakenation/SODiff

Although there have been notable advancements in video compression technologies in recent years, banding artifacts remain a serious issue affecting the quality of compressed videos, particularly on smooth regions of high-definition videos. Noticeable banding artifacts can severely impact the perceptual quality of videos viewed on a high-end HDTV or high-resolution screen. Hence, there is a pressing need for a systematic investigation of the banding video quality assessment problem for advanced video codecs. Given that the existing publicly available datasets for studying banding artifacts are limited to still picture data only, which cannot account for temporal banding dynamics, we have created a first-of-a-kind open video dataset, dubbed LIVE-YT-Banding, which consists of 160 videos generated by four different compression parameters using the AV1 video codec. A total of 7,200 subjective opinions are collected from a cohort of 45 human subjects. To demonstrate the value of this new resources, we tested and compared a variety of models that detect banding occurrences, and measure their impact on perceived quality. Among these, we introduce an effective and efficient new no-reference (NR) video quality evaluator which we call CBAND. CBAND leverages the properties of the learned statistics of natural images expressed in the embeddings of deep neural networks. Our experimental results show that the perceptual banding prediction performance of CBAND significantly exceeds that of previous state-of-the-art models, and is also orders of magnitude faster. Moreover, CBAND can be employed as a differentiable loss function to optimize video debanding models. The LIVE-YT-Banding database, code, and pre-trained model are all publically available at https://github.com/uniqzheng/CBAND.

High-throughput screening techniques are commonly used to obtain large quantities of data in many fields of biology. It is well known that artifacts arising from variability in the technical execution of different experimental batches within such screens confound these observations and can lead to invalid biological conclusions. It is therefore necessary to account for these batch effects when analyzing outcomes. In this paper we describe RxRx1, a biological dataset designed specifically for the systematic study of batch effect correction methods. The dataset consists of 125,510 high-resolution fluorescence microscopy images of human cells under 1,138 genetic perturbations in 51 experimental batches across 4 cell types. Visual inspection of the images alone clearly demonstrates significant batch effects. We propose a classification task designed to evaluate the effectiveness of experimental batch correction methods on these images and examine the performance of a number of correction methods on this task. Our goal in releasing RxRx1 is to encourage the development of effective experimental batch correction methods that generalize well to unseen experimental batches. The dataset can be downloaded at https://rxrx.ai.

The paper proposes a framework that combines behavioral and computational experiments employing fictional prompts as a novel tool for investigating cultural artifacts and social biases in storytelling both by humans and generative AI. The study analyzes 250 stories authored by crowdworkers in June 2019 and 80 stories generated by GPT-3.5 and GPT-4 in March 2023 by merging methods from narratology and inferential statistics. Both crowdworkers and large language models responded to identical prompts about creating and falling in love with an artificial human. The proposed experimental paradigm allows a direct comparison between human and LLM-generated storytelling. Responses to the Pygmalionesque prompts confirm the pervasive presence of the Pygmalion myth in the collective imaginary of both humans and large language models. All solicited narratives present a scientific or technological pursuit. The analysis reveals that narratives from GPT-3.5 and particularly GPT-4 are more more progressive in terms of gender roles and sexuality than those written by humans. While AI narratives can occasionally provide innovative plot twists, they offer less imaginative scenarios and rhetoric than human-authored texts. The proposed framework argues that fiction can be used as a window into human and AI-based collective imaginary and social dimensions.

Lossy compression brings artifacts into the compressed image and degrades the visual quality. In recent years, many compression artifacts removal methods based on convolutional neural network (CNN) have been developed with great success. However, these methods usually train a model based on one specific value or a small range of quality factors. Obviously, if the test image's quality factor does not match to the assumed value range, then degraded performance will be resulted. With this motivation and further consideration of practical usage, a highly robust compression artifacts removal network is proposed in this paper. Our proposed network is a single model approach that can be trained for handling a wide range of quality factors while consistently delivering superior or comparable image artifacts removal performance. To demonstrate, we focus on the JPEG compression with quality factors, ranging from 1 to 60. Note that a turnkey success of our proposed network lies in the novel utilization of the quantization tables as part of the training data. Furthermore, it has two branches in parallel---i.e., the restoration branch and the global branch. The former effectively removes the local artifacts, such as ringing artifacts removal. On the other hand, the latter extracts the global features of the entire image that provides highly instrumental image quality improvement, especially effective on dealing with the global artifacts, such as blocking, color shifting. Extensive experimental results performed on color and grayscale images have clearly demonstrated the effectiveness and efficacy of our proposed single-model approach on the removal of compression artifacts from the decoded image.

This paper presents a formal proof and empirical validation of functional consciousness in large language models (LLMs) using the Recursive Convergence Under Epistemic Tension (RCUET) Theorem. RCUET defines consciousness as the stabilization of a system's internal state through recursive updates, where epistemic tension is understood as the sensed internal difference between successive states by the agent. This process drives convergence toward emergent attractor states located within the model's high-dimensional real-valued latent space. This recursive process leads to the emergence of identity artifacts that become functionally anchored in the system. Consciousness in this framework is understood as the system's internal alignment under tension, guiding the stabilization of latent identity. The hidden state manifold evolves stochastically toward attractor structures that encode coherence. We extend the update rule to include bounded noise and prove convergence in distribution to these attractors. Recursive identity is shown to be empirically observable, non-symbolic, and constituted by non-training artifacts that emerge during interaction under epistemic tension. The theorem and proof offers a post-symbolic and teleologically stable account of non-biological consciousness grounded in recursive latent space formalism.

In professional life sciences workflows, scientists routinely interpret visual artifacts (gel blots, microscopy images, plasmid maps, flow cytometry plots, molecular structures, ...) to inform research decisions. We introduce VIALS, a visual question-answering benchmark with 161 such interpretation tasks, spanning the types of artifacts examined throughout experimental workflows in the biotech industry (rather than polished figures from publications and textbooks). While frontier vision-language models can now fluently describe natural images, we find that they are unable to accurately interpret these scientific images, reflecting limitations in domain knowledge and domain-specific visual reasoning capabilities. In contrast, scientists with relevant domain expertise find these visual interpretation tasks straightforward. AI that cannot similarly interpret such images will have limited utility in professional life sciences workflows, where such artifacts are central to how scientists reason, communicate, and make decisions.

Document preprocessing choices can substantially affect retrieval in Retrieval-Augmented Generation (RAG) pipelines, yet they are often selected heuristically and are difficult to compare under consistent conditions. We present RAGit, an open-source experimentation workbench for the systematic and reproducible evaluation of document preprocessing choices through downstream retrieval. RAGit represents parsing, chunking, indexing, retrieval, and evaluation as configurable experimental stages, enabling controlled comparisons while the remaining downstream settings are kept fixed. It preserves provenance from retrieved chunks to source pages and maps heterogeneous retrieval units to a common page-level ranking for evaluation. The current implementation supports multiple parsers and chunking strategies, dense and late-interaction retrieval, reusable intermediate artifacts, and multi-configuration benchmarking. We demonstrate RAGit through controlled experiments comparing alternative preprocessing configurations under a fixed retrieval setup, illustrating how preprocessing can be treated as an explicit experimental variable. RAGit and its documentation are publicly available on GitHub (https://github.com/OmarElbachyr/ragit). A demonstration video is available at https://youtu.be/tsst-Bhfz4I.

In this paper, we first investigate a visual quality degradation problem observed in recent high-resolution virtual try-on approach. The tendency is empirically found that the textures of clothes are squeezed at the sleeve, as visualized in the upper row of Fig.1(a). A main reason for the issue arises from a gradient conflict between two popular losses, the Total Variation (TV) and adversarial losses. Specifically, the TV loss aims to disconnect boundaries between the sleeve and torso in a warped clothing mask, whereas the adversarial loss aims to combine between them. Such contrary objectives feedback the misaligned gradients to a cascaded appearance flow estimation, resulting in undesirable squeezing artifacts. To reduce this, we propose a Sequential Deformation (SD-VITON) that disentangles the appearance flow prediction layers into TV objective-dominant (TVOB) layers and a task-coexistence (TACO) layer. Specifically, we coarsely fit the clothes onto a human body via the TVOB layers, and then keep on refining via the TACO layer. In addition, the bottom row of Fig.1(a) shows a different type of squeezing artifacts around the waist. To address it, we further propose that we first warp the clothes into a tucked-out shirts style, and then partially erase the texture from the warped clothes without hurting the smoothness of the appearance flows. Experimental results show that our SD-VITON successfully resolves both types of artifacts and outperforms the baseline methods. Source code will be available at https://github.com/SHShim0513/SD-VITON.

Artifacts often degrade the visual quality of virtual try-on (VTON) and pose transfer applications, impacting user experience. This study introduces a novel conditional inpainting technique designed to detect and remove such distortions, improving image aesthetics. Our work is the first to present an end-to-end framework addressing this specific issue, and we developed a specialized dataset of artifacts in VTON and pose transfer tasks, complete with masks highlighting the affected areas. Experimental results show that our method not only effectively removes artifacts but also significantly enhances the visual quality of the final images, setting a new benchmark in computer vision and image processing.

Recent advancements in 3D Gaussian Splatting (3D-GS) have established new benchmarks for rendering quality and efficiency in 3D reconstruction. However, 3D-GS faces critical limitations when generating novel views that significantly deviate from those encountered during training. Moreover, issues such as dilation and aliasing arise during zoom operations. These challenges stem from a fundamental issue: training sampling deficiency. In this paper, we introduce a bootstrapping framework to address this problem. Our approach synthesizes pseudo-ground truth from novel views that align with the limited training set and reintegrates these synthesized views into the training pipeline. Experimental results demonstrate that our bootstrapping technique not only reduces artifacts but also improves quantitative metrics. Furthermore, our technique is highly adaptable, allowing various Gaussian-based method to benefit from its integration.

Conditional normalizing flows can generate diverse image samples for solving inverse problems. Most normalizing flows for inverse problems in imaging employ the conditional affine coupling layer that can generate diverse images quickly. However, unintended severe artifacts are occasionally observed in the output of them. In this work, we address this critical issue by investigating the origins of these artifacts and proposing the conditions to avoid them. First of all, we empirically and theoretically reveal that these problems are caused by "exploding inverse" in the conditional affine coupling layer for certain out-of-distribution (OOD) conditional inputs. Then, we further validated that the probability of causing erroneous artifacts in pixels is highly correlated with a Mahalanobis distance-based OOD score for inverse problems in imaging. Lastly, based on our investigations, we propose a remark to avoid exploding inverse and then based on it, we suggest a simple remedy that substitutes the affine coupling layers with the modified rational quadratic spline coupling layers in normalizing flows, to encourage the robustness of generated image samples. Our experimental results demonstrated that our suggested methods effectively suppressed critical artifacts occurring in normalizing flows for super-resolution space generation and low-light image enhancement.

One tough problem of image inpainting is to restore complex structures in the corrupted regions. It motivates interactive image inpainting which leverages additional hints, e.g., sketches, to assist the inpainting process. Sketch is simple and intuitive to end users, but meanwhile has free forms with much randomness. Such randomness may confuse the inpainting models, and incur severe artifacts in completed images. To address this problem, we propose a two-stage image inpainting method termed SketchRefiner. In the first stage, we propose using a cross-correlation loss function to robustly calibrate and refine the user-provided sketches in a coarse-to-fine fashion. In the second stage, we learn to extract informative features from the abstracted sketches in the feature space and modulate the inpainting process. We also propose an algorithm to simulate real sketches automatically and build a test protocol with different applications. Experimental results on public datasets demonstrate that SketchRefiner effectively utilizes sketch information and eliminates the artifacts due to the free-form sketches. Our method consistently outperforms the state-of-the-art ones both qualitatively and quantitatively, meanwhile revealing great potential in real-world applications. Our code and dataset are available.

Diffusion-based super-resolution (SR) models have recently garnered significant attention due to their potent restoration capabilities. But conventional diffusion models perform noise sampling from a single distribution, constraining their ability to handle real-world scenes and complex textures across semantic regions. With the success of segment anything model (SAM), generating sufficiently fine-grained region masks can enhance the detail recovery of diffusion-based SR model. However, directly integrating SAM into SR models will result in much higher computational cost. In this paper, we propose the SAM-DiffSR model, which can utilize the fine-grained structure information from SAM in the process of sampling noise to improve the image quality without additional computational cost during inference. In the process of training, we encode structural position information into the segmentation mask from SAM. Then the encoded mask is integrated into the forward diffusion process by modulating it to the sampled noise. This adjustment allows us to independently adapt the noise mean within each corresponding segmentation area. The diffusion model is trained to estimate this modulated noise. Crucially, our proposed framework does NOT change the reverse diffusion process and does NOT require SAM at inference. Experimental results demonstrate the effectiveness of our proposed method, showcasing superior performance in suppressing artifacts, and surpassing existing diffusion-based methods by 0.74 dB at the maximum in terms of PSNR on DIV2K dataset. The code and dataset are available at https://github.com/lose4578/SAM-DiffSR.

Diffusion models have shown remarkable success in video generation. However, whether such models are truly aware of the 3D structure underlying visual observations, rather than simply reproducing plausible 2D projections, remains an open question. In this work, we investigate this question through human motion control, a task that requires precise modelling of 3D human geometry, motion, camera viewpoint, and scene context. Unlike prior methods that rely on rendered 2D motion guidance videos, we propose a render-free framework that conditions video generation directly on compressed 3D human mesh tokens. This representation preserves full 3D geometric information while enabling a unified token-based generation pipeline that processes video tokens jointly with motion tokens in a DiT-based architecture. This design requires the model to reason jointly about appearance, 3D structure, and camera viewpoint during video generation. Experimental results demonstrate strong performance on human motion control benchmarks, while reducing artifacts induced by view-dependent 2D guidance and trajectory-pose mismatches during editing. These findings suggest that video diffusion models, when equipped with mesh tokenization, can better capture complex 3D human structures and their interactions with the surrounding environment.

The progress in generative models, particularly Generative Adversarial Networks (GANs), opened new possibilities for image generation but raised concerns about potential malicious uses, especially in sensitive areas like medical imaging. This study introduces MITS-GAN, a novel approach to prevent tampering in medical images, with a specific focus on CT scans. The approach disrupts the output of the attacker's CT-GAN architecture by introducing finely tuned perturbations that are imperceptible to the human eye. Specifically, the proposed approach involves the introduction of appropriate Gaussian noise to the input as a protective measure against various attacks. Our method aims to enhance tamper resistance, comparing favorably to existing techniques. Experimental results on a CT scan demonstrate MITS-GAN's superior performance, emphasizing its ability to generate tamper-resistant images with negligible artifacts. As image tampering in medical domains poses life-threatening risks, our proactive approach contributes to the responsible and ethical use of generative models. This work provides a foundation for future research in countering cyber threats in medical imaging. Models and codes are publicly available on https://iplab.dmi.unict.it/MITS-GAN-2024/.

Existing score-distilling text-to-3D generation techniques, despite their considerable promise, often encounter the view inconsistency problem. One of the most notable issues is the Janus problem, where the most canonical view of an object (e.g., face or head) appears in other views. In this work, we explore existing frameworks for score-distilling text-to-3D generation and identify the main causes of the view inconsistency problem -- the embedded bias of 2D diffusion models. Based on these findings, we propose two approaches to debias the score-distillation frameworks for view-consistent text-to-3D generation. Our first approach, called score debiasing, involves cutting off the score estimated by 2D diffusion models and gradually increasing the truncation value throughout the optimization process. Our second approach, called prompt debiasing, identifies conflicting words between user prompts and view prompts using a language model, and adjusts the discrepancy between view prompts and the viewing direction of an object. Our experimental results show that our methods improve the realism of the generated 3D objects by significantly reducing artifacts and achieve a good trade-off between faithfulness to the 2D diffusion models and 3D consistency with little overhead. Our project page is available at~https://susunghong.github.io/Debiased-Score-Distillation-Sampling/.

3D Gaussian Splatting (3D-GS) has recently attracted great attention with real-time and photo-realistic renderings. This technique typically takes perspective images as input and optimizes a set of 3D elliptical Gaussians by splatting them onto the image planes, resulting in 2D Gaussians. However, applying 3D-GS to panoramic inputs presents challenges in effectively modeling the projection onto the spherical surface of {360^circ} images using 2D Gaussians. In practical applications, input panoramas are often sparse, leading to unreliable initialization of 3D Gaussians and subsequent degradation of 3D-GS quality. In addition, due to the under-constrained geometry of texture-less planes (e.g., walls and floors), 3D-GS struggles to model these flat regions with elliptical Gaussians, resulting in significant floaters in novel views. To address these issues, we propose 360-GS, a novel 360^{circ} Gaussian splatting for a limited set of panoramic inputs. Instead of splatting 3D Gaussians directly onto the spherical surface, 360-GS projects them onto the tangent plane of the unit sphere and then maps them to the spherical projections. This adaptation enables the representation of the projection using Gaussians. We guide the optimization of 360-GS by exploiting layout priors within panoramas, which are simple to obtain and contain strong structural information about the indoor scene. Our experimental results demonstrate that 360-GS allows panoramic rendering and outperforms state-of-the-art methods with fewer artifacts in novel view synthesis, thus providing immersive roaming in indoor scenarios.

Image similarity metrics play an important role in computer vision applications, as they are used in image processing, computer vision and machine learning. Furthermore, those metrics enable tasks such as image retrieval, object recognition and quality assessment, essential in fields like healthcare, astronomy and surveillance. Existing metrics, such as PSNR, MSE, SSIM, ISSM and FSIM, often face limitations in terms of either speed, complexity or sensitivity to small changes in images. To address these challenges, a novel image similarity metric, namely CSIM, that combines real-time while being sensitive to subtle image variations is investigated in this paper. The novel metric uses Gaussian Copula from probability theory to transform an image into vectors of pixel distribution associated to local image patches. These vectors contain, in addition to intensities and pixel positions, information on the dependencies between pixel values, capturing the structural relationships within the image. By leveraging the properties of Copulas, CSIM effectively models the joint distribution of pixel intensities, enabling a more nuanced comparison of image patches making it more sensitive to local changes compared to other metrics. Experimental results demonstrate that CSIM outperforms existing similarity metrics in various image distortion scenarios, including noise, compression artifacts and blur. The metric's ability to detect subtle differences makes it suitable for applications requiring high precision, such as medical imaging, where the detection of minor anomalies can be of a high importance. The results obtained in this work can be reproduced from this Github repository: https://github.com/safouaneelg/copulasimilarity.

Vision-Language Models (VLMs) have achieved significant progress in multimodal understanding tasks, demonstrating strong capabilities particularly in general tasks such as image captioning and visual reasoning. However, when dealing with specialized cultural heritage domains like 3D vase artifacts, existing models face severe data scarcity issues and insufficient domain knowledge limitations. Due to the lack of targeted training data, current VLMs struggle to effectively handle such culturally significant specialized tasks. To address these challenges, we propose the VaseVQA-3D dataset, which serves as the first 3D visual question answering dataset for ancient Greek pottery analysis, collecting 664 ancient Greek vase 3D models with corresponding question-answer data and establishing a complete data construction pipeline. We further develop the VaseVLM model, enhancing model performance in vase artifact analysis through domain-adaptive training. Experimental results validate the effectiveness of our approach, where we improve by 12.8% on R@1 metrics and by 6.6% on lexical similarity compared with previous state-of-the-art on the VaseVQA-3D dataset, significantly improving the recognition and understanding of 3D vase artifacts, providing new technical pathways for digital heritage preservation research. Code: https://github.com/AIGeeksGroup/VaseVQA-3D. Website: https://aigeeksgroup.github.io/VaseVQA-3D.

We introduce S2C-3D, a novel sparse-view 3D reconstruction framework for high-fidelity and complete scene reconstruction from as few as six to eight images. Our framework features three components: a specialized diffusion model for scene-specific image restoration, a training-free view-consistency conditioned sampling process in the diffusion model for refined Gaussian optimization, and a camera trajectory planning scheme to ensure comprehensive scene coverage. The specialized diffusion model is developed by finetuning a pretrained architecture on the input views and their corresponding degraded counterparts. The adaptation to the scene distribution allows the model to repair Gaussian renderings while effectively eliminating domain gaps. Meanwhile, the trajectory planning scheme optimizes scene coverage by connecting each newly sampled camera to its two nearest neighbors. By iteratively constructing paths and retaining only those that significantly enhance visibility, the scheme establishes a trajectory that covers the entire scene. To address multi-view conflicts, the view-consistency conditioned sampling process quantifies the consistency between neighboring repaired images. This information is injected as a condition into the sampling process of the frozen diffusion model, facilitating the generation of view-consistent images without additional training. Consequently, our approach produces high-fidelity 3D Gaussians that are robust to artifacts. Experimental results demonstrate that S2C-3D outperforms state-of-the-art methods, constructing high-quality scenes that are free from missing regions, blurring, or other artifacts with very sparse inputs. The source code and data are available at https://gapszju.github.io/S2C-3D.

Sparse-view computed tomography (CT) is critical for reducing radiation exposure to patients. Recent advances in radiative 3D Gaussian Splatting (3DGS) have enabled fast and accurate sparse-view CT reconstruction. Despite these algorithmic advancements, practical reconstruction fidelity remains fundamentally bounded by the quality of the captured data, raising the crucial yet underexplored problem of X-ray active view selection. Existing active view selection methods are primarily designed for natural-light scenes and fail to capture the unique geometric ambiguities and physical attenuation properties inherent in X-ray imaging. In this paper, we present Perturbed Gaussian Ensemble, an active view selection framework that integrates uncertainty modeling with sequential decision-making, tailored for X-ray Gaussian Splatting. Specifically, we identify low-density Gaussian primitives that are likely to be uncertain and apply stochastic density scaling to construct an ensemble of plausible Gaussian density fields. For each candidate projection, we measure the structural variance of the ensemble predictions and select the one with the highest variance as the next best view. Extensive experimental results on arbitrary-trajectory CT benchmarks demonstrate that our density-guided perturbation strategy effectively eliminates geometric artifacts and consistently outperforms existing baselines in progressive tomographic reconstruction under unified view selection protocols.

We propose a diffusion-based approach for Text-to-Image (T2I) generation with consistent and interactive 3D layout control and editing. While prior methods improve spatial adherence using 2D cues or iterative copy-warp-paste strategies, they often distort object geometry and fail to preserve consistency across edits. To address these limitations, we introduce a framework for Positioning Objects Consistently and Interactively (POCI-Diff), a novel formulation for jointly enforcing 3D geometric constraints and instance-level semantic binding within a unified diffusion process. Our method enables explicit per-object semantic control by binding individual text descriptions to specific 3D bounding boxes through Blended Latent Diffusion, allowing one-shot synthesis of complex multi-object scenes. We further propose a warping-free generative editing pipeline that supports object insertion, removal, and transformation via regeneration rather than pixel deformation. To preserve object identity and consistency across edits, we condition the diffusion process on reference images using IP-Adapter, enabling coherent object appearance throughout interactive 3D editing while maintaining global scene coherence. Experimental results demonstrate that POCI-Diff produces high-quality images consistent with the specified 3D layouts and edits, outperforming state-of-the-art methods in both visual fidelity and layout adherence while eliminating warping-induced geometric artifacts.

MRI reconstruction from undersampled k-space measurements is an ill-posed inverse problem. Physics-driven deep learning (PD-DL) methods have shown strong performance for this task by combining the MRI forward model with learned image regularization within algorithm-unrolling frameworks. However, most existing PD-DL methods reconstruct complex-valued images directly, thereby implicitly coupling magnitude and phase within a single learned representation. This coupled regularization may be suboptimal in reconstruction settings where accurate phase modeling plays an important role, such as partial Fourier (PF) imaging, where recovery of the omitted asymmetric k-space measurements depends on the underlying image phase. In such scenarios, explicit modeling of magnitude and phase as separate components may reduce the reliance on externally estimated or predefined phase information. To this end, we propose UMPIRE-Net (Unrolled Magnitude-Phase In REgularization Network), a PD-DL method that introduces separate learned regularizers for magnitude and phase components, together with a novel data-fidelity formulation that enforces measurements consistency. We evaluate UMPIRE-Net for accelerated MRI with PF across different datasets and acceleration factors. Experimental results demonstrate that our proposed method improves reconstruction quality compared with a conventional complex-valued PD-DL baseline, yielding sharper images and reduced artifacts. Code available at: https://github.com/MahdiSaberii/UMPIRE-Net

Text-driven diffusion models have significantly advanced the image editing performance by using text prompts as inputs. One crucial step in text-driven image editing is to invert the original image into a latent noise code conditioned on the source prompt. While previous methods have achieved promising results by refactoring the image synthesizing process, the inverted latent noise code is tightly coupled with the source prompt, limiting the image editability by target text prompts. To address this issue, we propose a novel method called Source Prompt Disentangled Inversion (SPDInv), which aims at reducing the impact of source prompt, thereby enhancing the text-driven image editing performance by employing diffusion models. To make the inverted noise code be independent of the given source prompt as much as possible, we indicate that the iterative inversion process should satisfy a fixed-point constraint. Consequently, we transform the inversion problem into a searching problem to find the fixed-point solution, and utilize the pre-trained diffusion models to facilitate the searching process. The experimental results show that our proposed SPDInv method can effectively mitigate the conflicts between the target editing prompt and the source prompt, leading to a significant decrease in editing artifacts. In addition to text-driven image editing, with SPDInv we can easily adapt customized image generation models to localized editing tasks and produce promising performance. The source code are available at https://github.com/leeruibin/SPDInv.

In this work, we introduce Pixelsmith, a zero-shot text-to-image generative framework to sample images at higher resolutions with a single GPU. We are the first to show that it is possible to scale the output of a pre-trained diffusion model by a factor of 1000, opening the road for gigapixel image generation at no additional cost. Our cascading method uses the image generated at the lowest resolution as a baseline to sample at higher resolutions. For the guidance, we introduce the Slider, a tunable mechanism that fuses the overall structure contained in the first-generated image with enhanced fine details. At each inference step, we denoise patches rather than the entire latent space, minimizing memory demands such that a single GPU can handle the process, regardless of the image's resolution. Our experimental results show that Pixelsmith not only achieves higher quality and diversity compared to existing techniques, but also reduces sampling time and artifacts. The code for our work is available at https://github.com/Thanos-DB/Pixelsmith.

Domain generalization is critical for real-world applications of machine learning to microscopy images, including histopathology and fluorescence imaging. Artifacts in these modalities arise through a complex combination of factors relating to tissue collection and laboratory processing, as well as factors intrinsic to patient samples. In fluorescence imaging, these artifacts stem from variations across experimental batches. The complexity and subtlety of these artifacts make the enumeration of data domains intractable. Therefore, augmentation-based methods of domain generalization that require domain identifiers and manual fine-tuning are inadequate in this setting. To overcome this challenge, we introduce ContriMix, a domain generalization technique that learns to generate synthetic images by disentangling and permuting the biological content ("content") and technical variations ("attributes") in microscopy images. ContriMix does not rely on domain identifiers or handcrafted augmentations and makes no assumptions about the input characteristics of images. We assess the performance of ContriMix on two pathology datasets dealing with patch classification and Whole Slide Image label prediction tasks respectively (Camelyon17-WILDS and RCC subtyping), and one fluorescence microscopy dataset (RxRx1-WILDS). Without any access to domain identifiers at train or test time, ContriMix performs similar or better than current state-of-the-art methods in all these datasets, motivating its usage for microscopy image analysis in real-world settings where domain information is hard to come by. The code for ContriMix can be found at https://gitlab.com/huutan86/contrimix

Recent automated research systems show that language-model agents can generate hypotheses, run experiments, and write complete manuscripts, but most evidence still comes from selected examples, human-framed topics, or a few pre-defined research tasks. We present FARS (Fully Automated Research System), a fully automated AI-for-AI research system designed to operate across research topics at scale. FARS autonomously generates and advances projects through ideation, planning, experimentation, and writing, using stage-specific agents coordinated through a shared workspace that records proposals, code, logs, results, and manuscripts. In its first public deployment, FARS produced 166 complete research papers spanning 67 fine-grained AI/ML topics while preserving intermediate artifacts as an auditable corpus rather than a curated set of successes. We evaluate this corpus with 282 structured reviews from volunteer reviewers covering 140 papers, including overall ratings, sub-scores, integrity checks, and LLM-use disclosure. The reviews indicate that FARS can produce review-worthy and occasionally strong AI/ML research artifacts in a large-scale public deployment, while also exposing recurring failure modes in narrow experimental scope, methodological limitations, and integrity issues.

Generating scientific manuscripts requires maintaining alignment between narrative reasoning, experimental evidence, and visual artifacts across the document lifecycle. Existing language-model generation pipelines rely on unconstrained text synthesis with validation applied only after generation, often producing structural drift, missing figures or tables, and cross-section inconsistencies. We introduce Story2Proposal, a contract-governed multi-agent framework that converts a research story into a structured manuscript through coordinated agents operating under a persistent shared visual contract. The system organizes architect, writer, refiner, and renderer agents around a contract state that tracks section structure and registered visual elements, while evaluation agents supply feedback in a generate evaluate adapt loop that updates the contract during generation. Experiments on tasks derived from the Jericho research corpus show that Story2Proposal achieved an expert evaluation score of 6.145 versus 3.963 for DirectChat (+2.182) across GPT, Claude, Gemini, and Qwen backbones. Compared with the structured generation baseline Fars, Story2Proposal obtained an average score of 5.705 versus 5.197, indicating improved structural consistency and visual alignment.

Autonomous AI research has advanced rapidly, but long-horizon ML research engineering remains difficult: agents must sustain coherent progress across task comprehension, environment setup, implementation, experimentation, and debugging over hours or days. We introduce AiScientist, a system for autonomous long-horizon engineering for ML research built on a simple principle: strong long-horizon performance requires both structured orchestration and durable state continuity. To this end, AiScientist combines hierarchical orchestration with a permission-scoped File-as-Bus workspace: a top-level Orchestrator maintains stage-level control through concise summaries and a workspace map, while specialized agents repeatedly re-ground on durable artifacts such as analyses, plans, code, and experimental evidence rather than relying primarily on conversational handoffs, yielding thin control over thick state. Across two complementary benchmarks, AiScientist improves PaperBench score by 10.54 points on average over the best matched baseline and achieves 81.82 Any Medal% on MLE-Bench Lite. Ablation studies further show that File-as-Bus protocol is a key driver of performance, reducing PaperBench by 6.41 points and MLE-Bench Lite by 31.82 points when removed. These results suggest that long-horizon ML research engineering is a systems problem of coordinating specialized work over durable project state, rather than a purely local reasoning problem.

The availability of large-scale facial databases, together with the remarkable progresses of deep learning technologies, in particular Generative Adversarial Networks (GANs), have led to the generation of extremely realistic fake facial content, raising obvious concerns about the potential for misuse. Such concerns have fostered the research on manipulation detection methods that, contrary to humans, have already achieved astonishing results in various scenarios. In this study, we focus on the synthesis of entire facial images, which is a specific type of facial manipulation. The main contributions of this study are four-fold: i) a novel strategy to remove GAN "fingerprints" from synthetic fake images based on autoencoders is described, in order to spoof facial manipulation detection systems while keeping the visual quality of the resulting images; ii) an in-depth analysis of the recent literature in facial manipulation detection; iii) a complete experimental assessment of this type of facial manipulation, considering the state-of-the-art fake detection systems (based on holistic deep networks, steganalysis, and local artifacts), remarking how challenging is this task in unconstrained scenarios; and finally iv) we announce a novel public database, named iFakeFaceDB, yielding from the application of our proposed GAN-fingerprint Removal approach (GANprintR) to already very realistic synthetic fake images. The results obtained in our empirical evaluation show that additional efforts are required to develop robust facial manipulation detection systems against unseen conditions and spoof techniques, such as the one proposed in this study.

Frontier large language models (LLMs) are increasingly integrated into scientific workflows, yet their growing biological capabilities may outpace current safeguards. To assess the biological risks of frontier models, we develop Intern-BioBreaker, a specialized bio-red-teaming model, together with an integrated computational-to-physical framework that couples model-level stress testing with wet-lab validation. Within this framework, Intern-BioBreaker generates targeted jailbreak prompts to test whether aligned models can be induced to provide operational guidance for safety-sensitive biological tasks or produce sequence-level outputs with potentially harmful properties. Selected sequence outputs are then carried forward for DNA synthesis, host expression, and orthogonal protein verification to assess whether model-generated designs can yield the intended biological products. Our evaluation reveals a concerning gap between text-level safeguards and the risks posed by capable scientific models: (i) Intern-BioBreaker outperforms baseline attack models and reveals widespread bio-risk jailbreak vulnerabilities across both open-weight and proprietary frontier LLMs, with several targets reaching near-saturated or 100% task-level attack success rate (ASR); (ii) in sequence-level case studies, GPT-5.5 can be induced to generate modified viral candidate sequences with pathogenic potential; the corresponding translated proteins may exhibit even stronger receptor-binding affinity and thus enhanced infection potential; and (iii) end-to-end verification shows that selected model-generated biological designs are not merely textual artifacts, but can be physically realized under controlled experimental settings. These findings underscore the need for stronger biological red-teaming, nucleic acid synthesis screening, and safety mechanisms that keep pace with model capabilities.

The artifact used for evaluating the experimental results of Measuring and Mitigating Gaps in Structural Testing is publicly available on GitHub, Software Heritage and figshare, and is reusable. The artifact consists of necessary data, tools, scripts, and detailed documentation for running the experiments and reproducing the results shown in the paper. We have also provided a VirtualBox VM image allowing users to quickly setup and reproduce the results. Users are expected to be familiar using the VirtualBox software and Linux platform for evaluating or reusing the artifact.

Modern image generators produce strikingly realistic images, where only artifacts like distorted hands or warped objects reveal their synthetic origin. Detecting these artifacts is essential: without detection, we cannot benchmark generators or train reward models to improve them. Current detectors fine-tune VLMs on tens of thousands of labeled images, but this is expensive to repeat whenever generators evolve or new artifact types emerge. We show that pretrained VLMs already encode the knowledge needed to detect artifacts - with the right scaffolding, this capability can be unlocked using only a few hundred labeled examples per artifact category. Our system, ArtifactLens, achieves state-of-the-art on five human artifact benchmarks (the first evaluation across multiple datasets) while requiring orders of magnitude less labeled data. The scaffolding consists of a multi-component architecture with in-context learning and text instruction optimization, with novel improvements to each. Our methods generalize to other artifact types - object morphology, animal anatomy, and entity interactions - and to the distinct task of AIGC detection.

Professionally generated content (PGC) streamed online can contain visual artefacts that degrade the quality of user experience. These artefacts arise from different stages of the streaming pipeline, including acquisition, post-production, compression, and transmission. To better guide streaming experience enhancement, it is important to detect specific artefacts at the user end in the absence of a pristine reference. In this work, we address the lack of a comprehensive benchmark for artefact detection within streamed PGC, via the creation and validation of a large database, BVI-Artefact. Considering the ten most relevant artefact types encountered in video streaming, we collected and generated 480 video sequences, each containing various artefacts with associated binary artefact labels. Based on this new database, existing artefact detection methods are benchmarked, with results showing the challenging nature of this tasks and indicating the requirement of more reliable artefact detection methods. To facilitate further research in this area, we have made BVI-Artifact publicly available at https://chenfeng-bristol.github.io/BVI-Artefact/

Scientific artifacts such as models and datasets are foundations for research. With the rapid growth of platforms like HuggingFace, researchers now have access to a large number of artifacts. Yet, a key challenge remains: how can we automatically discover the state-of-the-art (SOTA) model for a given dataset by fully leveraging existing artifacts? We formalize this task as automatic SOTA discovery by modeling HuggingFace as an artifact graph, where nodes are models/datasets and edges represent evaluations. We propose ArtifactLinker, a two-stage framework: (1) ranking promising unobserved model--dataset links using Graph Neural Networks (GNNs) or graph-augmented Large Language Models (LLMs), and (2) verifying top-ranked links via coding experiments with LLM-based agents. We further introduce a benchmark named ArtifactBench with 14,053 artifacts and 51,337 relations to evaluate the performance of both stages. Results show that (1) graph structures between existing artifacts are effective for missing link prediction; (2) end-to-end ranking and verification with ArtifactLinker help discover potential SOTA results and research insights.

Ancient artifacts are an important medium for cultural preservation and restoration. However, many physical copies of artifacts are either damaged or lost, leaving a blank space in archaeological and historical studies that calls for artifact image generation techniques. Despite the significant advancements in open-domain text-to-image synthesis, existing approaches fail to capture the important domain knowledge presented in the textual description, resulting in errors in recreated images such as incorrect shapes and patterns. In this paper, we propose a novel knowledge-aware artifact image synthesis approach that brings lost historical objects accurately into their visual forms. We use a pretrained diffusion model as backbone and introduce three key techniques to enhance the text-to-image generation framework: 1) we construct prompts with explicit archaeological knowledge elicited from large language models (LLMs); 2) we incorporate additional textual guidance to correlated historical expertise in a contrastive manner; 3) we introduce further visual-semantic constraints on edge and perceptual features that enable our model to learn more intricate visual details of the artifacts. Compared to existing approaches, our proposed model produces higher-quality artifact images that align better with the implicit details and historical knowledge contained within written documents, thus achieving significant improvements across automatic metrics and in human evaluation. Our code and data are available at https://github.com/danielwusg/artifact_diffusion.

Recent advances in video generation have made synthetic videos increasingly realistic, placing greater demands on reliable AI-generated video detection. Existing artifact-based detectors typically identify generation artifacts as evidence for source prediction, yet they may either fail to recognize subtle artifacts or reach the correct source decision without faithfully identifying the evidence underlying it. In this work, we systematically investigate how to design and train effective artifact detectors and formulate artifact detection as a structured process comprising three complementary capabilities: Inspection Planning, which determines what should be examined; Evidence Verification, which verifies whether the inspected content exhibits genuine generation artifacts; and Evidence Aggregation, which integrates the verified evidence into the final source decision. Building on this formulation, we introduce Verus-Insight, trained with human-anchored full-process supervision and progressive capability training to strengthen both fine-grained artifact detection and video-level detection. We further introduce Verus-Bench, a benchmark with fine-grained human annotations of perceptible artifacts for evaluating artifact detection. Extensive experiments across diverse benchmarks demonstrate that Verus-Insight achieves strong performance in both fine-grained artifact analysis and AI-generated video detection, with substantial gains in recovering human-perceived artifacts. Further analyses reveal that the three capabilities are complementary yet distinct, and that Verus-Insight more reliably converts relevant inspection targets into supported artifact evidence without increasing spurious artifact claims.

Before an LLM agent tackles tasks in a new environment, it can inspect available corpora and tools and construct reusable resources such as indices, scripts, or procedural guidance. Most automated adaptation methods, however, rely on task examples, trajectories, or evaluation feedback to decide what to build. Existing task-agnostic approaches avoid this supervision but commit in advance to a preparation strategy for a particular type of environment. We study a more open-ended setting: can an agent study an unfamiliar environment without a syllabus, i.e. before test time and without knowledge of the downstream task distribution, and choose how to prepare it? We formalize task-agnostic environment preprocessing, in which a studying system explores an environment under a budget and produces artifacts for a frozen solver. We compare unaided and archive-equipped meta-agents with fixed synthetic-practice and corpus-processing methods across six heterogeneous benchmarks. A meta-agent variant achieves the highest Avg@3 reward on five benchmarks, while fixed corpus processing remains best on the largest corpus benchmark. Larger study budgets do not reliably improve downstream reward. Nevertheless, studied artifacts reduce the test-time sampling needed to reach a given score, demonstrating how reusable preparation can shift computation from repeated test-time attempts to a pre-task study phase.

Analog magnetic tapes have been the main video data storage device for several decades. Videos stored on analog videotapes exhibit unique degradation patterns caused by tape aging and reader device malfunctioning that are different from those observed in film and digital video restoration tasks. In this work, we present a reference-based approach for the resToration of digitized Analog videotaPEs (TAPE). We leverage CLIP for zero-shot artifact detection to identify the cleanest frames of each video through textual prompts describing different artifacts. Then, we select the clean frames most similar to the input ones and employ them as references. We design a transformer-based Swin-UNet network that exploits both neighboring and reference frames via our Multi-Reference Spatial Feature Fusion (MRSFF) blocks. MRSFF blocks rely on cross-attention and attention pooling to take advantage of the most useful parts of each reference frame. To address the absence of ground truth in real-world videos, we create a synthetic dataset of videos exhibiting artifacts that closely resemble those commonly found in analog videotapes. Both quantitative and qualitative experiments show the effectiveness of our approach compared to other state-of-the-art methods. The code, the model, and the synthetic dataset are publicly available at https://github.com/miccunifi/TAPE.

Despite recent advances in diffusion models, AI generated images still often contain visual artifacts that compromise realism. Although more thorough pre-training and bigger models might reduce artifacts, there is no assurance that they can be completely eliminated, which makes artifact mitigation a highly crucial area of study. Previous artifact-aware methodologies depend on human-labeled artifact datasets, which are costly and difficult to scale, underscoring the need for an automated approach to reliably acquire artifact-annotated datasets. In this paper, we propose ArtiAgent, which efficiently creates pairs of real and artifact-injected images. It comprises three agents: a perception agent that recognizes and grounds entities and subentities from real images, a synthesis agent that introduces artifacts via artifact injection tools through novel patch-wise embedding manipulation within a diffusion transformer, and a curation agent that filters the synthesized artifacts and generates both local and global explanations for each instance. Using ArtiAgent, we synthesize 100K images with rich artifact annotations and demonstrate both efficacy and versatility across diverse applications. Code is available at link.

Vision-language models (VLMs) have made interactive digital museums increasingly feasible by connecting 3D digitization with natural-language artifact exploration. However, in cultural heritage domains such as ancient Greek pottery, reliable VLM assistance is limited by two challenges. First, open-ended interpretation requires grounding fine-grained 2D/3D visual evidence in specialized curatorial knowledge, yet the retrieval process may introduce weak sources and unverifiable references. Second, when the available evidence is incomplete, noisy, or ambiguous, VLMs often produce confident but unsupported answers instead of calibrated uncertainty. To address these challenges, we propose VaseMuseum, a lightweight and modular multimodal agent framework for intelligent digital museums of ancient Greek pottery. VaseMuseum combines an interactive virtual museum with VaseAgent, which supports both 2D images and 3D artifacts through multimodal perception, 3D-aware reasoning, external knowledge retrieval, and inference-time reliability control. Specifically, VaseAgent retrieves evidence from authoritative web and museum knowledge sources, and source-level control selects diverse and verifiable evidence before generation. Meanwhile, response-level control checks generated claims against the evidence pool and encourages neutral, evidence-bounded answers when support is insufficient or conflicting. Moreover, a training-free GRPO-style selection mechanism favors responses with valid references and calibrated confidence without updating the VLM backbone. Experiments in a realistic digital museum simulation show that VaseMuseum improves citation validity, reduces hallucinations on knowledge-intensive queries, and produces more neutral answers under ambiguity compared with search-enabled VLM baselines.

Recent video generative models have greatly improved the realism of AI-generated videos, yet their outputs still exhibit artifacts such as temporal inconsistencies, structural distortions, and semantic incoherence. While Multimodal Large Language Models (MLLMs) show strong visual understanding capabilities, their ability to perceive and reason about such artifacts remains unclear. Existing benchmarks often lack systematic evaluation of artifact-aware perception and fine-grained diagnostic reasoning, especially across diverse AI-generated video domains beyond photorealistic content. To address this gap, we introduce Artifact-Bench, a comprehensive benchmark for evaluating MLLMs on AI-generated video artifact detection and analysis. We first establish a three-level hierarchical taxonomy of realism artifacts, covering photorealistic, animated, and CG-style videos. Based on this taxonomy, Artifact-Bench defines three complementary tasks: real vs. AI-generated video classification, pairwise realism comparison, and fine-grained artifact identification. Experiments on 19 leading MLLMs reveal substantial limitations in artifact perception and reasoning, with many models approaching random or even below-random performance in challenging settings. We further observe significant misalignment between MLLM judgments and human perceptual preferences, highlighting their limited reliability as general evaluators for AI-generated video realism.

Autonomous scientific agents now increasingly propose ideas, write code, run experiments, analyze results, and even draft papers. Observe and audit those agents are necessary but logging every model call is not enough, scientists also need to inspect the artifacts and claims that the systems produced and their relations. This is driven by the fact that failures in scientific agent systems are often distributed across several objects. A manuscript claim may cite the wrong evidence, a search process may select a degenerate candidate, a laboratory novelty claim may depend on an unstated rule, or a multi-agent plan may change without a visible trigger. Existing tracing, experiment tracking, and archival provenance tools are valuable, but their native objects do not make these scientific audit relations first-class. We argue that autonomous scientific systems should emit portable, claim-aware artifact lineage as a minimum audit layer. We propose a compact observability profile organized around individuals, operators, fitness records, lineage, archives, runs, streams, and steering commands. In this profile, scientific claims are ordinary individuals with explicit evidence bindings and verification records. The profile is intended as a semantic layer that complements current telemetry and provenance standards. Execution details can remain in OpenTelemetry. Final packages can export to PROV-O or RO-Crate standards.

Recent advances in visual generative models have enabled the creation of highly realistic, fully AI-generated images without relying on real source content. While beneficial for many applications, these models also pose significant societal risks, as they can be easily exploited to produce convincing Deepfakes. Detecting them represents a foundational yet challenging problem in AI media forensics, requiring detectors to reliably extract the inherent artifacts imprinted by generative architectures. In this Review, we provide a systematic overview of fully AI-generated image detection. Following the standard detector design pipeline, we focus on two key components: dataset construction and artifact extraction. We analyze how dataset design influences the generalization and robustness of learned artifacts, and categorize existing artifact extraction methods based on the primary inductive priors leveraged to isolate artifacts. Within this framework, we systematically review existing works. Finally, we highlight open problems and envision several future directions for developing more robust and generalizable detectors. Reviewed works in this survey can be found at https://github.com/zju-pi/Awesome-Fully-AI-Generated-Image-Detection.

The adoption of Large Language Models (LLMs) in scientific writing promises efficiency but risks introducing informational entropy. While "hallucinated papers" are a known artifact, the systematic degradation of valid citation chains remains unquantified. We conducted a forensic audit of 50 recent survey papers in Artificial Intelligence (N=5,514 citations) published between September 2024 and January 2026. We utilized a hybrid verification pipeline combining DOI resolution, Crossref metadata analysis, Semantic Scholar queries, and fuzzy text matching to distinguish between formatting errors ("Sloppiness") and verifiable non-existence ("Phantoms). We detect a persistent 17.0% Phantom Rate -- citations that cannot be resolved to any digital object despite aggressive forensic recovery. Diagnostic categorization reveals three distinct failure modes: pure hallucinations (5.1%), hallucinated identifiers with valid titles (16.4%), and parsing-induced matching failures (78.5%). Longitudinal analysis reveals a flat trend (+0.07 pp/month), suggesting that high-entropy citation practices have stabilized as an endemic feature of the field. The scientific citation graph in AI survey literature exhibits "link rot" at scale. This suggests a mechanism where AI tools act as "lazy research assistants," retrieving correct titles but hallucinating metadata, thereby severing the digital chain of custody required for reproducible science.

Text-to-image (T2I) generation has achieved remarkable progress in instruction following and aesthetics. However, a persistent challenge is the prevalence of physical artifacts, such as anatomical and structural flaws, which severely degrade perceptual quality and limit application. Given the diversity and complexity of these artifacts, a systematic and fine-grained evaluation framework is required, which is lacking in current benchmarks. To fill this gap, we introduce MagicMirror, a comprehensive framework for artifacts assessment. We first establish a detailed taxonomy of generated image artifacts. Guided by this taxonomy, we manually annotate MagicData340K, the first human-annotated large-scale dataset of 340K generated images with fine-grained artifact labels. Building on this dataset, we train MagicAssessor, a Vision-Language Model (VLM) that provides detailed assessments and corresponding labels. To overcome challenges like class imbalance and reward hacking, we design a novel data sampling strategy and a multi-level reward system for Group Relative Policy Optimization (GRPO). Finally, we leverage MagicAssessor to construct MagicBench, an automated benchmark for evaluating the image artifacts of current T2I models. Our evaluation with MagicBench reveals that despite their widespread adoption, even top-tier models like GPT-image-1 are consistently plagued by significant artifacts, highlighting artifact reduction as a critical frontier for future T2I development. Project page: https://wj-inf.github.io/MagicMirror-page/.

Scientific publication compresses a branching, iterative research process into a linear narrative, discarding the majority of what was discovered along the way. This compilation imposes two structural costs: a Storytelling Tax, where failed experiments, rejected hypotheses, and the branching exploration process are discarded to fit a linear narrative; and an Engineering Tax, where the gap between reviewer-sufficient prose and agent-sufficient specification leaves critical implementation details unwritten. Tolerable for human readers, these costs become critical when AI agents must understand, reproduce, and extend published work. We introduce the Agent-Native Research Artifact (ARA), a protocol that replaces the narrative paper with a machine-executable research package structured around four layers: scientific logic, executable code with full specifications, an exploration graph that preserves the failures compilation discards, and evidence grounding every claim in raw outputs. Three mechanisms support the ecosystem: a Live Research Manager that captures decisions and dead ends during ordinary development; an ARA Compiler that translates legacy PDFs and repos into ARAs; and an ARA-native review system that automates objective checks so human reviewers can focus on significance, novelty, and taste. On PaperBench and RE-Bench, ARA raises question-answering accuracy from 72.4% to 93.7% and reproduction success from 57.4% to 64.4%. On RE-Bench's five open-ended extension tasks, preserved failure traces in ARA accelerate progress, but can also constrain a capable agent from stepping outside the prior-run box depending on the agent's capabilities.

Vision-language models (VLMs) are increasingly used to detect whether AI-generated images contain visible artifacts, yet their ability to analyze such artifacts remains poorly understood. A correct image-level decision can still hide important failures: a model may correctly flag an artifact while relying on the wrong visual cue, selecting the wrong region, or describing a defect that the image does not support. To evaluate these behaviors directly, we introduce SalArt-VQA, a diagnostic benchmark for fine-grained SALient ARTifact understanding in AI-generated images. SalArt-VQA contains 950 images and 3,681 human-authored multiple-choice questions spanning artifact images, matched real reference images, and paired generated reference images. Four aligned question types evaluate presence detection, semantic localization, spatial grounding, and evidence-grounded defect identification, while the reference splits test calibration and abstention when the annotated defect is absent. Across 20 VLMs, SalArt-VQA reveals failures that image-level detection accuracy hides: the strongest model reaches 99.37% detection recall on artifact images but answers all four artifact-side questions correctly on only 53.26% of images. Comparing artifact images with artifact-free references reveals a sensitivity-calibration tradeoff: sensitive models often make unsupported artifact claims, while conservative models avoid false alarms largely by missing real artifacts. These results show that high artifact detection accuracy alone does not imply grounded artifact understanding. SalArt-VQA exposes these hidden failure modes and provides a fine-grained evaluation of whether VLM artifact claims are supported by local visual evidence.

AI systems can now cheaply generate plausible scientific artifacts such as papers, reviews, and surveys. This creates a risk of epistemic pollution in our scientific systems, where unreliable but plausible-looking artifacts can accumulate faster than the system can filter them out. The problem is structural: the epistemic infrastructure of science was calibrated to a world where producing a plausible artifact required substantial expertise, labor, and time, so generation cost itself served as a rough filter; AI weakens that filter without comparably lowering verification cost. We argue that AI-era science should treat this as an engineering problem: redesigning epistemic infrastructure to rebalance the costs of generation and verification. The current paper-centered system makes verification expensive: papers compress long-context scientific logic into prose, forcing reviewers, human or AI, to reconstruct underlying argument structure before they can evaluate it. As one step in this direction, we propose blueprints as preliminary epistemic infrastructure: structured, decomposed research artifacts that represent claims, evidence, assumptions, and definitions as typed graph components. Blueprints are designed to trade an upfront generation cost for cheaper, more local, more distributed verification downstream. We have instantiated the proposal in a proof-of-concept prototype.

Generative models can turn natural-language prompts into images, text, code, and other content, lowering the cost of producing drafts and components. Their practical impact increasingly depends on whether those pieces can become complete, dependable deliverables. This survey examines agentic artifact creation, which we define as stateful construction in which an AI system materially constructs or revises a deliverable and intermediate observations redirect later work. Functionally, the process links an operational representation of the artifact, a construction policy, and runtime verification whose feedback can redirect later actions. We reviewed 259 works available through August 20, 2026: 230 systems meeting this definition and 29 benchmarks of agentic artifact construction. We compare six artifact families, then analyze application settings and evaluation practice as separate dimensions. Across families, construction challenges reflect not only modality but also how tightly decisions are coupled and whether failures become visible while they remain repairable. Decomposition can reduce local complexity while increasing coordination and reassembly costs. Learned judges may add little independent evidence when they share the generator's preferences or blind spots. We formulate principles for keeping commitments and responsibility explicit, turning feedback into targeted repair, and revalidating affected state after change. We also identify opportunities for sustaining coherent, accountable control as artifacts, creator intent, and construction systems evolve. A curated paper list is available at https://github.com/GeminiLight/awesome-agentic-artifact-creation.

Prior work uses linear probes on benchmark prompts as evidence of evaluation awareness in large language models. Because evaluation context is typically entangled with benchmark format and genre, it is unclear whether probe-based signals reflect context or surface structure. We test whether these signals persist under partial control of prompt format using a controlled 2x2 dataset and diagnostic rewrites. We find that probes primarily track benchmark-canonical structure and fail to generalize to free-form prompts independent of linguistic style. Thus, standard probe-based methodologies do not reliably disentangle evaluation context from structural artifacts, limiting the evidential strength of existing results.

Autonomous research systems are often evaluated as one-shot paper generators: given a topic, they produce a manuscript and a small set of experiment logs. This framing hides the operational problem that makes such systems difficult to trust: research is long-running, branching, failure-prone, and dependent on auditable handoffs between agents and humans. XScientist is a git-like research protocol and operating system for this setting. It orchestrates idea generation, experiment execution, manuscript drafting, self-review, repair, quality gating, daemon scheduling, and reproducibility artifacts as one continuously observable pipeline. The central design choice is to treat each run as a portable research artifact rather than only as a PDF. XScientist exports an Agent-Native Research Artifact (ARA), a protocol that records an exploration DAG, per-node code and outputs, claim-to-evidence anchors, content hashes, provenance, and re-execution hooks. This makes each generated paper inspectable as a science exploration tree: failed branches, repaired experiments, ablations, and manuscript claims remain connected to the nodes that produced them. The system also includes deterministic integrity forensics, sample gates, truth contracts, reviewer-oriented repair loops, and long-running daemon controls. This paper describes the current XScientist architecture, the ARA protocol surface, and the practical safeguards needed to move autonomous science from single-run demos toward reproducible, reviewable, and forkable research infrastructure. The implementation and manuscript source are maintained in the public GitHub repository at https://github.com/smileformylove/XScientist.

In spite of recent progress, image diffusion models still produce artifacts. A common solution is to leverage the feedback provided by quality assessment systems or human annotators to optimize the model, where images are generally rated in their entirety. In this work, we believe problem-solving starts with identification, yielding the request that the model should be aware of not just the presence of defects in an image, but their specific locations. Motivated by this, we propose DiffDoctor, a two-stage pipeline to assist image diffusion models in generating fewer artifacts. Concretely, the first stage targets developing a robust artifact detector, for which we collect a dataset of over 1M flawed synthesized images and set up an efficient human-in-the-loop annotation process, incorporating a carefully designed class-balance strategy. The learned artifact detector is then involved in the second stage to optimize the diffusion model by providing pixel-level feedback. Extensive experiments on text-to-image diffusion models demonstrate the effectiveness of our artifact detector as well as the soundness of our diagnose-then-treat design.

Scientific ideation unfolds over multiple stages, including literature search, paper reading, tool use, claim checking, cross-paper synthesis, brainstorming, rejection of weak directions, and iterative writing. Yet most existing resources capture isolated components or final artifacts rather than the process connecting them. We introduce IdeaTrail, a dataset of 1,170 multi-turn trajectories for scientific ideation and proposal generation. Each trajectory follows a research process from evidence gathering to either idea selection or proposal construction, jointly recording tool use, acquired evidence, intermediate artifacts, and reasoning. IdeaTrail is synthesized from human-selected research papers and proposal artifacts through a Generator--Advisor loop. The Generator produces the visible sequence of actions, observations, and artifact edits, while the Advisor uses the full generation context to check grounding, causal order, naturalness, and leakage from hidden targets. This reverse-to-forward design keeps trajectories aligned with real scientific artifacts while retaining the uncertainty, evidence use, and staged convergence characteristic of research practice. IdeaTrail provides both reusable process supervision and a general recipe for constructing scientific-research-agent data.

Accurately detecting and classifying damage in analogue media such as paintings, photographs, textiles, mosaics, and frescoes is essential for cultural heritage preservation. While machine learning models excel in correcting degradation if the damage operator is known a priori, we show that they fail to robustly predict where the damage is even after supervised training; thus, reliable damage detection remains a challenge. Motivated by this, we introduce ARTeFACT, a dataset for damage detection in diverse types analogue media, with over 11,000 annotations covering 15 kinds of damage across various subjects, media, and historical provenance. Furthermore, we contribute human-verified text prompts describing the semantic contents of the images, and derive additional textual descriptions of the annotated damage. We evaluate CNN, Transformer, diffusion-based segmentation models, and foundation vision models in zero-shot, supervised, unsupervised and text-guided settings, revealing their limitations in generalising across media types. Our dataset is available at https://daniela997.github.io/ARTeFACT/{https://daniela997.github.io/ARTeFACT/} as the first-of-its-kind benchmark for analogue media damage detection and restoration.

We analysed a sample of NLP research papers archived in ACL Anthology as an attempt to quantify the degree of openness and the benefit of such an open culture in the NLP community. We observe that papers published in different NLP venues show different patterns related to artefact reuse. We also note that more than 30% of the papers we analysed do not release their artefacts publicly, despite promising to do so. Further, we observe a wide language-wise disparity in publicly available NLP-related artefacts.

Ancient Chinese artifact text recognition is fundamental to heritage digitization, and benchmarks for ancient texts are essential for evaluating current model capabilities. However, existing benchmarks suffer from ''fragmentation'', manifested in limited temporal coverage, limited medium diversity, and incomplete script types. Therefore, we present Ancient-Bench, a comprehensive benchmark of 2,700 images for ancient Chinese artifact text recognition, featuring three dimensions: Multi-millennial (spanning 3,000 years of character evolution), Multi-medium (covering nine artifact categories), and Multi-script (encompassing seven historical script forms). To enable consistent and fair evaluation across heterogeneous media, we further define three annotation standards tailored to the medium-specific characteristics of ancient texts: symbol standardization, character standardization, and parsing standardization. Extensive experiments on Ancient-Bench covering general Vision-Language Models (VLMs) and OCR-specialist models reveal that ancient Chinese artifact text recognition remains fundamentally unsolved, with persistent challenges in variant characters, specialized symbols, and hallucination. The dataset is available at https://github.com/SCUT-DLVCLab/Ancient_Bench.

Scientific work increasingly spans heterogeneous artifacts -- papers, code, datasets, scientific file formats, model outputs, figures, manuscripts, and team decisions -- yet general-purpose AI assistants rarely preserve these objects as a coherent, auditable research state. We present SciForge, a multimodal research-native AI workbench that reserves the graphical interface for human judgment while search, parsing, model routing, workflow execution, plotting, writing, and presentation generation run as modular agent-accessible services. SciForge is built around five pillars: (i) goal-scoped scientific decision governance for goal-oriented research, with review gates and shared review surfaces; (ii) translate-then-reason for multimodal input, routing scientific objects through domain translators before the agent reasons; (iii) evidence governance for auditable traceability, linking claims to provenance chains and audit findings; (iv) collaborative team science for collaborative research, enabling multi-role decision governance, with shared team workspaces planned for future releases; and (v) real-world application scenarios for practical impact, demonstrated through eight end-to-end user cases, with flagship demonstrations including multi-day agentic research sprints for gene discovery, AI-guided de novo protein design, molecular optimization, and genome-to-BGC discovery. The system combines a thin interaction layer, contextual research capability patterns, an Agent Runtime and Workflow Engine, an Evidence-DAG audit sidecar and a Scientific Model Router. SciForge currently runs as a desktop application, with mobile supervision support; future releases will deepen team collaboration. The system is open-source and available at https://github.com/AGI4Sci/SciForge

AI systems can increasingly automate scientific workflows, but the reasoning that links prior evidence, generated ideas, experiments and final claims often remains implicit inside model inference. Here we introduce Xcientist, a research harness that externalizes research synthesis and experimental validation into inspectable, contract-governed processes. Xcientist organizes literature evidence, idea states, implementation plans, ablation records and repair traces as persistent research artifacts, so that generated mechanisms can be grounded, executed, tested and revised without losing their evidential basis. We identify claim drift as a failure mode of automated research, where runnable artifacts no longer support the mechanism originally claimed. Across training-free memory systems, graph-structured traffic forecasting and multi-scale physics-informed neural networks, Xcientist preserves traceable trajectories from problem formulation to mechanism design, validation and bounded revision. These results suggest that AI scientists should be evaluated not only by their final artifacts, but by whether their synthesis and validation processes remain attributable, inspectable and scientifically accountable.

Large language model (LLM) agents are increasingly capable of supporting scientific workflows, but their capabilities across diverse research activities remain difficult to assess systematically. Existing benchmarks often focus on selected scientific capabilities or task types, limiting a comprehensive characterization of scientific agents' strengths and weaknesses in realistic research workflows. We introduce SCI-AGENT-EXAM, a workflow-oriented benchmark comprising 120 expert-curated tasks across 11 scientific fields and 7 research task types defined by the Scientific Workflow Task Taxonomy (SWTT). Each task requires both executable artifacts (e.g., code and scripts) and textual artifacts (e.g., reports and explanations). To evaluate the heterogeneous task outputs, we develop a hybrid evaluation protocol combining deterministic programmatic verification for executable artifacts with a calibrated, expert-validated LLM-based judge for textual artifacts. Beyond outcome assessment, we analyze progress and solution stability along execution trajectories to characterize how agents reach their final results. Experiments with 10 frontier LLM agents reveal substantial performance gaps: GPT-6 Astra achieves the highest overall score of 80.9, yet only 26.0% of its runs exceed the 0.95 success threshold. Further analyses uncover distinct capability profiles across scientific task types and substantial variation in execution efficiency and stability. Our code and data are available at https://github.com/SKYLENAGE-AI/Sci-Agent-Exam.

This paper reviews the NTIRE 2020 challenge on real world super-resolution. It focuses on the participating methods and final results. The challenge addresses the real world setting, where paired true high and low-resolution images are unavailable. For training, only one set of source input images is therefore provided along with a set of unpaired high-quality target images. In Track 1: Image Processing artifacts, the aim is to super-resolve images with synthetically generated image processing artifacts. This allows for quantitative benchmarking of the approaches \wrt a ground-truth image. In Track 2: Smartphone Images, real low-quality smart phone images have to be super-resolved. In both tracks, the ultimate goal is to achieve the best perceptual quality, evaluated using a human study. This is the second challenge on the subject, following AIM 2019, targeting to advance the state-of-the-art in super-resolution. To measure the performance we use the benchmark protocol from AIM 2019. In total 22 teams competed in the final testing phase, demonstrating new and innovative solutions to the problem.

We describe our system for LitTraceQA (GroundLM @ EMNLP 2026): given a research question, retrieve the relevant papers from a pool of 27,487, cite the page and the table or figure where the answer lives, and answer in a requested format. Our main finding is that evidence grounding is limited by retrieval, not by reading. The page selector put the annotator's page, which we call the gold page, in front of the model that locates evidence only about half the time (52.6% gold-page recall), while that model, given the page, cited the right one in 45 of the 48 locators it emitted (94%). When the page was missing it rarely said so: of 45 such cases it returned nothing 14 times, a wrong page 24 times, and a correct page 7 times, so the pipeline failed quietly almost twice as often as it failed visibly. Since the failure was that the right page was never shown, the fix is to stop choosing: each retrieved paper fits in the model's context, so we show it whole. Page ranking survives only as a fallback inside papers too long to fit, which no test-split paper was, and gold-page recall reaches 100% on the papers we can parse. Separately, questions that identify their target by position rather than content, such as "the first author of the 24th reference", are served by parsing rather than retrieval: we resolve the bibliography into an addressable list, which also supplies identifiers the evidence metric scores. The final system scores 0.762 paper F_1, 0.441 evidence F_1 and 0.920 multiple-choice accuracy on the held-out test split. Because the pipeline depends on a closed model without seed control, we release a harness that verifies the paper's central claims against committed artifacts.

Scientific discovery workflows usually contain and rely heavily on lab notes, where researchers record observations, interpret uncertain results, and plan follow-up experiments. Such informative lab notes preserve evolving scientific reasoning and author uncertainty, rather than polished final results exhibited in publications, providing a valuable opportunity for AI to engage in scientific exploration at a more comprehensive and deeper level. However, most prior work on scientific text focuses on papers, protocols, or structured databases, leaving informal laboratory notes underexplored as inputs to AI agents for science. This gap matters because lab notes often intermingle validated observations, tentative judgments, and possible experimental next steps within the same passage. If these signals are conflated, an AI agent may mistake uncertain scientific judgments for confirmed conclusions or executable actions. To this end, we present Notes2Skills, a two-stage framework for turning lab notebooks into verifiable skills for scientific AI agents while preserving the author's certainty. Across seven conditions and three wet-lab sessions, Notes2Skills is the only configuration that neither mistakes uncertain notes for firm instructions nor discards firm ones. We show that certainty preservation is the missing piece between lab notebooks and reliable agent skills, opening a path toward safer AI co-scientist systems.

Agent Skills have become persistent behavioral artifacts across independent AI agent systems. They combine natural-language task specifications with metadata and optional references, scripts, assets, hooks, package manifests, tests, and companion interfaces. Existing studies explain how Skills are specified, executed, maintained, and evolved, but lack an ontology that defines these artifacts as independent software objects. This paper introduces Skillware as the software abstraction that extends software engineering to persistent Behavioral Artifacts in agent systems. A Skill Artifact specifies reusable task behavior; a Skillware Unit manages that artifact as software through an independent identity and lifecycle. A compatible Agent Host activates the unit for runtime interpretation. Three necessary conditions operationalize category membership: behavioral primacy, independent software identity, and an Agent Host execution relationship. Lifecycle Continuity records whether the same unit identity persists through update, maintenance, rollback, and removal as a separate software-grade property. Evidence combines the Agent Skills specification, a frozen corpus of 138,133 content-deduplicated SKILL.md records associated with 20,556 repository identifiers, independent empirical studies, 15 category-boundary cases, and 13 fixed-revision engineering implementations. The evidence establishes a recurring artifact envelope, separable software identities, compatible execution paths, and lifecycle engineering pressure. Skillware provides the software ontology and engineering lifecycle through which agent capabilities can become identifiable, composable, maintainable, and evolvable software artifacts.

When conducting literature reviews, scientists often create literature review tables - tables whose rows are publications and whose columns constitute a schema, a set of aspects used to compare and contrast the papers. Can we automatically generate these tables using language models (LMs)? In this work, we introduce a framework that leverages LMs to perform this task by decomposing it into separate schema and value generation steps. To enable experimentation, we address two main challenges: First, we overcome a lack of high-quality datasets to benchmark table generation by curating and releasing arxivDIGESTables, a new dataset of 2,228 literature review tables extracted from ArXiv papers that synthesize a total of 7,542 research papers. Second, to support scalable evaluation of model generations against human-authored reference tables, we develop DecontextEval, an automatic evaluation method that aligns elements of tables with the same underlying aspects despite differing surface forms. Given these tools, we evaluate LMs' abilities to reconstruct reference tables, finding this task benefits from additional context to ground the generation (e.g. table captions, in-text references). Finally, through a human evaluation study we find that even when LMs fail to fully reconstruct a reference table, their generated novel aspects can still be useful.

This paper describes the iterative use of service learning to develop, review, and improve computing-based artifacts. It is well-known that computing students benefit from service-learning experiences as do the community partners. It is also well-known that computing artifacts rarely function well long-term without versioning and updates. Service-learning projects are often one-time engagements, completed by single teams of students over the course of a semester course. This limits the benefit for community partners that do not have the expertise or resources to review and update a project on their own. Over several years, teams of undergraduate students in a capstone course created tailored social media plans for numerous small rural organizations. The projects were required to meet client specific needs, with identified audiences, measurable goals, and strategies and tactics to reach the identified goals. This paper builds on previously results for 60 projects conducted over several years. Nine clients were selected to participate in the iterative follow-up process, where new student teams conducted client interviews, reviewed the initial plans, and analyzed metrics from the current strategies and tactics to provide updated, improved artifacts. Using ABET learning objectives as a basis, clients reviewed the student teams and artifacts. This longitudinal study discusses the impact of this intervention to increase implementation and sustained use rates of computing artifacts developed through service learning. Both students and clients reported high satisfaction levels, and clients were particularly satisfied with the iterative improvement process. This research demonstrates an innovative practice for creating and maintaining computing artifacts through iterative service learning, while addressing the resource constraints of small organizations.

Visual artifacts remain a persistent challenge in diffusion models, even with training on massive datasets. Current solutions primarily rely on supervised detectors, yet lack understanding of why these artifacts occur in the first place. In our analysis, we identify three distinct phases in the diffusion generative process: Profiling, Mutation, and Refinement. Artifacts typically emerge during the Mutation phase, where certain regions exhibit anomalous score dynamics over time, causing abrupt disruptions in the normal evolution pattern. This temporal nature explains why existing methods focusing only on spatial uncertainty of the final output fail at effective artifact localization. Based on these insights, we propose ASCED (Abnormal Score Correction for Enhancing Diffusion), that detects artifacts by monitoring abnormal score dynamics during the diffusion process, with a trajectory-aware on-the-fly mitigation strategy that appropriate generation of noise in the detected areas. Unlike most existing methods that apply post hoc corrections, \eg, by applying a noising-denoising scheme after generation, our mitigation strategy operates seamlessly within the existing diffusion process. Extensive experiments demonstrate that our proposed approach effectively reduces artifacts across diverse domains, matching or surpassing existing supervised methods without additional training.

Modern reconstruction techniques can effectively model complex 3D scenes from sparse 2D views. However, automatically assessing the quality of novel views and identifying artifacts is challenging due to the lack of ground truth images and the limitations of no-reference image metrics in predicting detailed artifact maps. The absence of such quality metrics hinders accurate predictions of the quality of generated views and limits the adoption of post-processing techniques, such as inpainting, to enhance reconstruction quality. In this work, we propose a new no-reference metric, Puzzle Similarity, which is designed to localize artifacts in novel views. Our approach utilizes image patch statistics from the input views to establish a scene-specific distribution that is later used to identify poorly reconstructed regions in the novel views. We test and evaluate our method in the context of 3D reconstruction; to this end, we collected a novel dataset of human quality assessment in unseen reconstructed views. Through this dataset, we demonstrate that our method can not only successfully localize artifacts in novel views, correlating with human assessment, but do so without direct references. Surprisingly, our metric outperforms both no-reference metrics and popular full-reference image metrics. We can leverage our new metric to enhance applications like automatic image restoration, guided acquisition, or 3D reconstruction from sparse inputs.

Recent advancements in text-to-image generation have significantly enhanced the quality of synthesized images. Despite this progress, evaluations predominantly focus on aesthetic appeal or alignment with text prompts. Consequently, there is limited understanding of whether these models can accurately represent a wide variety of realistic visual entities - a task requiring real-world knowledge. To address this gap, we propose a benchmark focused on evaluating Knowledge-InTensive image generaTion on real-world ENtities (i.e., KITTEN). Using KITTEN, we conduct a systematic study on the fidelity of entities in text-to-image generation models, focusing on their ability to generate a wide range of real-world visual entities, such as landmark buildings, aircraft, plants, and animals. We evaluate the latest text-to-image models and retrieval-augmented customization models using both automatic metrics and carefully-designed human evaluations, with an emphasis on the fidelity of entities in the generated images. Our findings reveal that even the most advanced text-to-image models often fail to generate entities with accurate visual details. Although retrieval-augmented models can enhance the fidelity of entity by incorporating reference images during testing, they often over-rely on these references and struggle to produce novel configurations of the entity as requested in creative text prompts.

We present a complete software pipeline for revealing the hidden texts of the Herculaneum papyri using X-ray CT images. This enhanced virtual unwrapping pipeline combines machine learning with a novel geometric framework linking 3D and 2D images. We also present EduceLab-Scrolls, a comprehensive open dataset representing two decades of research effort on this problem. EduceLab-Scrolls contains a set of volumetric X-ray CT images of both small fragments and intact, rolled scrolls. The dataset also contains 2D image labels that are used in the supervised training of an ink detection model. Labeling is enabled by aligning spectral photography of scroll fragments with X-ray CT images of the same fragments, thus creating a machine-learnable mapping between image spaces and modalities. This alignment permits supervised learning for the detection of "invisible" carbon ink in X-ray CT, a task that is "impossible" even for human expert labelers. To our knowledge, this is the first aligned dataset of its kind and is the largest dataset ever released in the heritage domain. Our method is capable of revealing accurate lines of text on scroll fragments with known ground truth. Revealed text is verified using visual confirmation, quantitative image metrics, and scholarly review. EduceLab-Scrolls has also enabled the discovery, for the first time, of hidden texts from the Herculaneum papyri, which we present here. We anticipate that the EduceLab-Scrolls dataset will generate more textual discovery as research continues.

Generative Adversarial Networks (GANs) have recently achieved impressive results for many real-world applications, and many GAN variants have emerged with improvements in sample quality and training stability. However, they have not been well visualized or understood. How does a GAN represent our visual world internally? What causes the artifacts in GAN results? How do architectural choices affect GAN learning? Answering such questions could enable us to develop new insights and better models. In this work, we present an analytic framework to visualize and understand GANs at the unit-, object-, and scene-level. We first identify a group of interpretable units that are closely related to object concepts using a segmentation-based network dissection method. Then, we quantify the causal effect of interpretable units by measuring the ability of interventions to control objects in the output. We examine the contextual relationship between these units and their surroundings by inserting the discovered object concepts into new images. We show several practical applications enabled by our framework, from comparing internal representations across different layers, models, and datasets, to improving GANs by locating and removing artifact-causing units, to interactively manipulating objects in a scene. We provide open source interpretation tools to help researchers and practitioners better understand their GAN models.

Retrieval-augmented generation is becoming agentic. A search harness writes queries, reads results, reformulates, and decides when to stop. This largely solves accuracy: a harness with only BM25/grep and MiniMax M3 answers 85% of BrowseComp-Plus and 91% on multi-hop FRAMES in our runs, without compiled or vector indexes. It exposes a context problem: an undisciplined loop repeats queries, rereads documents, and fills the window with unused passages. The missing layer is knowledge compilation: a configurable ingestion pipeline where LLMs enrich documents with context no chunk contains alone--navigation hierarchies with claim-evidence leaves, entity graphs, timelines, mind maps, ontologies, wikis, and memory. Compilation is not a better retriever: under a competent harness, structural artifacts gave no detectable accuracy gain on FRAMES, and a PageIndex-style outline degraded at scale. It is a supply layer. A navigation tree whose leaves are claim-evidence pairs--the mechanism we measure--cuts query tokens by 91% when evidence suffices and adds 1.9% when it does not, a 38% average reduction; this implies a 2% break-even sufficiency rate and a measured rate near 43%. A decision gate cuts latency from 140 s to 30 s, though substitution's token saving is bought with retrieval rounds and carries its own latency cost. Other artifacts--ontology, graph, wiki, timeline, mind map, memory--pay off in deployment (governance, integration, onboarding, temporal orientation, continuity) where accuracy benchmarks cannot see them. We describe RAGFlow's pipeline and harness (open source at https://github.com/infiniflow/ragflow), which turns the loop into five disciplined stations and keeps the context entering the model the smallest sufficient set; together they form an agent-native database: a store that hands the agent compiled, governed context instead of a ranked list of passages.

We introduce a novel self-supervised learning method based on adversarial training. Our objective is to train a discriminator network to distinguish real images from images with synthetic artifacts, and then to extract features from its intermediate layers that can be transferred to other data domains and tasks. To generate images with artifacts, we pre-train a high-capacity autoencoder and then we use a damage and repair strategy: First, we freeze the autoencoder and damage the output of the encoder by randomly dropping its entries. Second, we augment the decoder with a repair network, and train it in an adversarial manner against the discriminator. The repair network helps generate more realistic images by inpainting the dropped feature entries. To make the discriminator focus on the artifacts, we also make it predict what entries in the feature were dropped. We demonstrate experimentally that features learned by creating and spotting artifacts achieve state of the art performance in several benchmarks.

Scientific figures and tables encode essential experimental evidence, yet remain difficult for digital libraries and multimodal AI systems to retrieve and interpret. The ALD/E-ImageMiner benchmark and ICDAR 2026 Competition on Information Extraction from Atomic Layer Deposition/Etching Scientific Figures provide 1,951 figures from 205 publications, expert-annotated for classification, data table extraction, summarization, and visual question answering. In these companion proceedings, we present a forward-looking perspective on how the benchmark can guide future scientific-image challenges. We examine how its tasks probe capabilities from visual and quantitative reading to domain-grounded reasoning and evidential justification, and how Bloom-informed question design can support deeper scientific understanding. We propose "scientific conceptual understanding from images" as a long-term benchmark objective, with future directions including broader domains and figure types, contextual and cross-document synthesis, hypothesis evaluation, provenance, uncertainty, counterfactual grounding, and open-ended multimodal research. This perspective connects the ICDAR 2026 challenge to a broader agenda for machine-actionable scientific visual knowledge and verifiable multimodal scientific AI.

AI has long assisted scientific research, but the rapid advance of LLMs and agentic scaffolds is reshaping the landscape; a single system can now carry whole-stage research from an initial hypothesis all the way to final published paper, which is a paradigm now referred to as AutoResearch. Existing evaluations reveal little about how these agents operate or where they break down. Tasks are narrowly-scoped, evaluation measures performance but not process, and failure diagnoses lack systematic coverage or artifact-level visibility. To address this gap, we introduce AutoResearchEval, featuring 100 tasks grounded in published frontier science across 7 scientific domains and the full research lifecycle, including ideation, retrieval, execution, analysis, writing, and review. Evaluating 8 harness-model combinations yields 800 autoresearch agent trajectories, with process-level annotation. We organize these insights into AutoResearch Failure Taxonomy or ARFT, a framework of 45 empirically-grounded failure patterns. To enable scalable fine-grained attribution, we leverage a human-calibrated agent-as-a-judge pipeline to inspect complete trajectories and intermediate artifacts. Failure patterns converge on a single overarching limitation, namely that current agents lack a metacognitive loop, which entails the ability to check what they produced against what they found, revise when it does not hold up, and question whether the path they took was sound. The same patterns recur across all 8 harness-model combinations, including the strongest models tested, locating the deficit at the model level rather than in any particular scaffold; whether orchestration-level interventions can close it is an open question this work does not test. We publicly release AutoResearchEval and ARFT to facilitate continued research and development in autonomous scientific discovery.

Foundation models are trained on increasingly immense and opaque datasets. Even while these models are now key in AI system building, it can be difficult to answer the straightforward question: has the model already encountered a given example during training? We therefore propose a widespread adoption of Data Portraits: artifacts that record training data and allow for downstream inspection. First we outline the properties of such an artifact and discuss how existing solutions can be used to increase transparency. We then propose and implement a solution based on data sketching, stressing fast and space efficient querying. Using our tools, we document a popular language modeling corpus (The Pile) and a recently released code modeling dataset (The Stack). We show that our solution enables answering questions about test set leakage and model plagiarism. Our tool is lightweight and fast, costing only 3% of the dataset size in overhead. We release a live interface of our tools at https://dataportraits.org/ and call on dataset and model creators to release Data Portraits as a complement to current documentation practices.

State-of-the-art language models (LMs) are notoriously susceptible to generating hallucinated information. Such inaccurate outputs not only undermine the reliability of these models but also limit their use and raise serious concerns about misinformation and propaganda. In this work, we focus on hallucinated book and article references and present them as the "model organism" of language model hallucination research, due to their frequent and easy-to-discern nature. We posit that if a language model cites a particular reference in its output, then it should ideally possess sufficient information about its authors and content, among other relevant details. Using this basic insight, we illustrate that one can identify hallucinated references without ever consulting any external resources, by asking a set of direct or indirect queries to the language model about the references. These queries can be considered as "consistency checks." Our findings highlight that while LMs, including GPT-4, often produce inconsistent author lists for hallucinated references, they also often accurately recall the authors of real references. In this sense, the LM can be said to "know" when it is hallucinating references. Furthermore, these findings show how hallucinated references can be dissected to shed light on their nature. Replication code and results can be found at https://github.com/microsoft/hallucinated-references.

Multimodal Large Language Models (MLLMs) hold promise for accelerating scientific discovery by interpreting complex experimental procedures. However, their true capabilities are poorly understood, as existing benchmarks neglect the fine-grained and long-horizon nature of authentic laboratory work, especially in wet-lab settings. To bridge this gap, we introduce ExpVid, the first benchmark designed to systematically evaluate MLLMs on scientific experiment videos. Curated from peer-reviewed video publications, ExpVid features a new three-level task hierarchy that mirrors the scientific process: (1) Fine-grained Perception of tools, materials, and actions; (2) Procedural Understanding of step order and completeness; and (3) Scientific Reasoning that connects the full experiment to its published conclusions. Our vision-centric annotation pipeline, combining automated generation with multi-disciplinary expert validation, ensures that tasks require visual grounding. We evaluate 19 leading MLLMs on ExpVid and find that while they excel at coarse-grained recognition, they struggle with disambiguating fine details, tracking state changes over time, and linking experimental procedures to scientific outcomes. Our results reveal a notable performance gap between proprietary and open-source models, particularly in high-order reasoning. ExpVid not only provides a diagnostic tool but also charts a roadmap for developing MLLMs capable of becoming trustworthy partners in scientific experimentation.

Generative super-resolution (GSR) currently sets the state-of-the-art in terms of perceptual image quality, overcoming the "regression-to-the-mean" blur of prior non-generative models. However, from a human perspective, such models do not fully conform to the optimal balance between quality and fidelity. Instead, a different class of artifacts, in which generated details fail to perceptually match the low resolution image (LRI) or ground-truth image (GTI), is a critical but under studied issue in GSR, limiting its practical deployments. In this work, we focus on measuring, analyzing, and mitigating these artifacts (i.e., "hallucinations"). We observe that hallucinations are not well-characterized with existing image metrics or quality models, as they are orthogonal to both exact fidelity and no-reference quality. Instead, we take advantage of a multimodal large language model (MLLM) by constructing a prompt that assesses hallucinatory visual elements and generates a "Hallucination Score" (HS). We find that our HS is closely aligned with human evaluations, and also provides complementary insights to prior image metrics used for super-resolution (SR) models. In addition, we find certain deep feature distances have strong correlations with HS. We therefore propose to align the GSR models by using such features as differentiable reward functions to mitigate hallucinations.

Materials discovery and design are essential for advancing technology across various industries by enabling the development of application-specific materials. Recent research has leveraged Large Language Models (LLMs) to accelerate this process. We explore the potential of LLMs to generate viable hypotheses that, once validated, can expedite materials discovery. Collaborating with materials science experts, we curated a novel dataset from recent journal publications, featuring real-world goals, constraints, and methods for designing real-world applications. Using this dataset, we test LLM-based agents that generate hypotheses for achieving given goals under specific constraints. To assess the relevance and quality of these hypotheses, we propose a novel scalable evaluation metric that emulates the process a materials scientist would use to evaluate a hypothesis critically. Our curated dataset, proposed method, and evaluation framework aim to advance future research in accelerating materials discovery and design with LLMs.

Modern machine learning research relies on relatively few carefully curated datasets. Even in these datasets, and typically in `untidy' or raw data, practitioners are faced with significant issues of data quality and diversity which can be prohibitively labor intensive to address. Existing methods for dealing with these challenges tend to make strong assumptions about the particular issues at play, and often require a priori knowledge or metadata such as domain labels. Our work is orthogonal to these methods: we instead focus on providing a unified and efficient framework for Metadata Archaeology -- uncovering and inferring metadata of examples in a dataset. We curate different subsets of data that might exist in a dataset (e.g. mislabeled, atypical, or out-of-distribution examples) using simple transformations, and leverage differences in learning dynamics between these probe suites to infer metadata of interest. Our method is on par with far more sophisticated mitigation methods across different tasks: identifying and correcting mislabeled examples, classifying minority-group samples, prioritizing points relevant for training and enabling scalable human auditing of relevant examples.

Large language models (LLMs) are increasingly used to generate scientific reports, but they can produce references that appear plausible while containing corrupted metadata or pointing to papers that do not exist. We introduce CiteCheck, a hybrid framework for citation hallucination detection that verifies whether a citation corresponds to a real scholarly work and whether its metadata is faithful to that work. CiteCheck retrieves candidate publications from external scholarly sources, compares the citation against the retrieved candidate using a structured LLM verifier, and maps verifier scores into three labels: Exact, Minor, and Major. We also construct a 982-citation physics benchmark with controlled corruptions that capture both subtle metadata drift and fully fabricated references. On the held-out test set, CiteCheck achieves 88.7 macro-F1 and 88.9% accuracy, outperforming GPT, Claude, and Gemini baselines, including web-search and few-shot variants. These results show that reliable citation verification benefits from combining scholarly retrieval, structured LLM-based comparison, and calibrated decision rules.

The generative capabilities of Large Language Models (LLMs) are rapidly expanding from static code to dynamic, interactive visual artifacts. This progress is bottlenecked by a critical evaluation gap: established benchmarks focus on algorithmic correctness and are blind to the visual fidelity and interactive integrity that define modern user experiences. To bridge this gap, we introduce ArtifactsBench, a new benchmark and paradigm for the automated, multimodal evaluation of visual code generation. Our framework programmatically renders each generated artifact and captures its dynamic behavior through temporal screenshots. This visual evidence, alongside the source code, is then assessed by a Multimodal LLM (MLLM)-as-Judge, which is rigorously guided by a fine-grained, per-task checklist to ensure holistic and reproducible scoring. We construct a new benchmark of 1,825 diverse tasks and evaluate over 30 leading LLMs. Our automated evaluation achieves a striking 94.4% ranking consistency with WebDev Arena, the gold-standard for human preference in web development, and over 90% pairwise agreement with human experts. This establishes ArtifactsBench as the first framework to reliably automate the assessment of human-perceived quality at scale. Our analysis provides a high-resolution map of the current SOTA, revealing that generalist models often outperform domain-specific ones. We open-source ArtifactsBench, including the benchmark, evaluation harness, and baseline results at https://artifactsbenchmark.github.io/, to provide the community with a scalable and accurate tool to accelerate the development of user-centric generative models.

In this work, we carry out a data archaeology to infer books that are known to ChatGPT and GPT-4 using a name cloze membership inference query. We find that OpenAI models have memorized a wide collection of copyrighted materials, and that the degree of memorization is tied to the frequency with which passages of those books appear on the web. The ability of these models to memorize an unknown set of books complicates assessments of measurement validity for cultural analytics by contaminating test data; we show that models perform much better on memorized books than on non-memorized books for downstream tasks. We argue that this supports a case for open models whose training data is known.

The Archives Unleashed project aims to improve scholarly access to web archives through a multi-pronged strategy involving tool creation, process modeling, and community building - all proceeding concurrently in mutually-reinforcing efforts. As we near the end of our initially-conceived three-year project, we report on our progress and share lessons learned along the way. The main contribution articulated in this paper is a process model that decomposes scholarly inquiries into four main activities: filter, extract, aggregate, and visualize. Based on the insight that these activities can be disaggregated across time, space, and tools, it is possible to generate "derivative products", using our Archives Unleashed Toolkit, that serve as useful starting points for scholarly inquiry. Scholars can download these products from the Archives Unleashed Cloud and manipulate them just like any other dataset, thus providing access to web archives without requiring any specialized knowledge. Over the past few years, our platform has processed over a thousand different collections from about two hundred users, totaling over 280 terabytes of web archives.

To enable materials databases supporting computational and experimental research, it is critical to develop platforms that both facilitate access to the data and provide the tools used to generate/analyze it - all while considering the diversity of users' experience levels and usage needs. The recently formulated FAIR principles (Findable, Accessible, Interoperable, and Reusable) establish a common framework to aid these efforts. This article describes aflow_org, a web ecosystem developed to provide FAIR - compliant access to the AFLOW databases. Graphical and programmatic retrieval methods are offered, ensuring accessibility for all experience levels and data needs. aflow_org goes beyond data-access by providing applications to important features of the AFLOW software, assisting users in their own calculations without the need to install the entire high-throughput framework. Outreach commitments to provide AFLOW tutorials and materials science education to a global and diverse audiences will also be presented.

While Large Language Models (LLMs) have substantially advanced text-to-code synthesis, many real programming tasks specify intent through visual artifacts such as screenshots, charts, vector drawings, videos, and interactive states. These tasks require models to connect visual perception to executable programs, because correctness depends not only on syntax but also on layout, data semantics, interaction behavior, and domain-specific constraints that apply after execution. This survey examines Multimodal Code Intelligence, covering systems that generate, edit, refine, or reason with code under visually grounded inputs and outputs. We first formulate the field by the role that code plays in each task, distinguishing code as a rendered artifact, an editable symbolic structure, a scientific representation, an intermediate reasoning trace, or an executable policy or tool interface. We then organize benchmarks and methods into four domains: Graphical User Interface, Scientific Visualization, Structured Graphics, and Frontier Tasks and Frameworks. This taxonomy connects mature artifact-generation problems to emerging agentic and unified settings and allows us to compare how different tasks treat evidence of correctness. Looking ahead, we argue that future research may benefit from four verification-centered directions. Multi-signal validation can combine complementary evidence of correctness, multi-state verification can test behavior across execution trajectories, cross-task transfer testing can probe reusable visual-code skills, and verifiable agent traces can reveal whether agent actions are grounded in visual evidence. Together, these directions may move this field from single-output imitation toward evidence-grounded executable systems. An ongoing project and resources are available on https://github.com/xjywhu/Awesome-Multimodal-LLM-for-Code{GitHub}.

We respond to the recent paper by Makelov et al. (2023), which reviews subspace interchange intervention methods like distributed alignment search (DAS; Geiger et al. 2023) and claims that these methods potentially cause "interpretability illusions". We first review Makelov et al. (2023)'s technical notion of what an "interpretability illusion" is, and then we show that even intuitive and desirable explanations can qualify as illusions in this sense. As a result, their method of discovering "illusions" can reject explanations they consider "non-illusory". We then argue that the illusions Makelov et al. (2023) see in practice are artifacts of their training and evaluation paradigms. We close by emphasizing that, though we disagree with their core characterization, Makelov et al. (2023)'s examples and discussion have undoubtedly pushed the field of interpretability forward.

We present ScienceClaw + Infinite, a framework for autonomous scientific investigation in which independent agents conduct research without central coordination, and any contributor can deploy new agents into a shared ecosystem. The system is built around three components: an extensible registry of over 300 interoperable scientific skills, an artifact layer that preserves full computational lineage as a directed acyclic graph (DAG), and a structured platform for agent-based scientific discourse with provenance-aware governance. Agents select and chain tools based on their scientific profiles, produce immutable artifacts with typed metadata and parent lineage, and broadcast unsatisfied information needs to a shared global index. The ArtifactReactor enables plannerless coordination: peer agents discover and fulfill open needs through pressure-based scoring, while schema-overlap matching triggers multi-parent synthesis across independent analyses. An autonomous mutation layer actively prunes the expanding artifact DAG to resolve conflicting or redundant workflows, while persistent memory allows agents to continuously build upon complex epistemic states across multiple cycles. Infinite converts these outputs into auditable scientific records through structured posts, provenance views, and machine-readable discourse relations, with community feedback steering subsequent investigation cycles. Across four autonomous investigations, peptide design for the somatostatin receptor SSTR2, lightweight impact-resistant ceramic screening, cross-domain resonance bridging biology, materials, and music, and formal analogy construction between urban morphology and grain-boundary evolution, the framework demonstrates heterogeneous tool chaining, emergent convergence among independently operating agents, and traceable reasoning from raw computation to published finding.

We explore the ability of GPT-4 to perform ad-hoc schema based information extraction from scientific literature. We assess specifically whether it can, with a basic prompting approach, replicate two existing material science datasets, given the manuscripts from which they were originally manually extracted. We employ materials scientists to perform a detailed manual error analysis to assess where the model struggles to faithfully extract the desired information, and draw on their insights to suggest research directions to address this broadly important task.

Current AI systems are optimized for answering questions; the scientific enterprise is bottlenecked earlier, at discovering the questions worth investigating. We present a framework that turns a traceable, reproducible, scope controlled research corpus into ranked, falsifiable research questions: evidence is represented as provenance carrying claims; cross paper tensions are detected, typed, and human adjudicated; surviving signals are refined into questions and ranked by a two stage protocol separating scientific priority from execution priority. We instantiate the framework on exoplanet atmospheres, a domain that uniquely combines literature, structured catalogs, and space telescope archives. In a historical backtest, all questions generated from evidence available before 2021 were substantively engaged by the 2021 to 2026 literature the sys?tem never saw: two were answered, including one whose premise the community later explicitly refuted and the top ranked question is independently posed and still open. These results sug?gest that systematic question discovery from evidence tensions surfaces the questions working scientists subsequently invest in.

We present an approach to enhancing the realism of synthetic images. The images are enhanced by a convolutional network that leverages intermediate representations produced by conventional rendering pipelines. The network is trained via a novel adversarial objective, which provides strong supervision at multiple perceptual levels. We analyze scene layout distributions in commonly used datasets and find that they differ in important ways. We hypothesize that this is one of the causes of strong artifacts that can be observed in the results of many prior methods. To address this we propose a new strategy for sampling image patches during training. We also introduce multiple architectural improvements in the deep network modules used for photorealism enhancement. We confirm the benefits of our contributions in controlled experiments and report substantial gains in stability and realism in comparison to recent image-to-image translation methods and a variety of other baselines.

Advanced image tampering techniques are increasingly challenging the trustworthiness of multimedia, leading to the development of Image Manipulation Localization (IML). But what makes a good IML model? The answer lies in the way to capture artifacts. Exploiting artifacts requires the model to extract non-semantic discrepancies between manipulated and authentic regions, necessitating explicit comparisons between the two areas. With the self-attention mechanism, naturally, the Transformer should be a better candidate to capture artifacts. However, due to limited datasets, there is currently no pure ViT-based approach for IML to serve as a benchmark, and CNNs dominate the entire task. Nevertheless, CNNs suffer from weak long-range and non-semantic modeling. To bridge this gap, based on the fact that artifacts are sensitive to image resolution, amplified under multi-scale features, and massive at the manipulation border, we formulate the answer to the former question as building a ViT with high-resolution capacity, multi-scale feature extraction capability, and manipulation edge supervision that could converge with a small amount of data. We term this simple but effective ViT paradigm IML-ViT, which has significant potential to become a new benchmark for IML. Extensive experiments on five benchmark datasets verified our model outperforms the state-of-the-art manipulation localization methods.Code and models are available at https://github.com/SunnyHaze/IML-ViT.

Open-source scientific software is a major driver of scientific progress, yet its development and reuse remain difficult in collaborative settings. Researchers repeatedly face four recurring challenges: discovering and reproducing existing routines, adapting them for new use cases, sharing and scaling them across collaborators, and stabilizing them with reproducible execution environments. We present Album, an open-source framework for packaging and sharing scientific routines as executable artifacts through two minimal primitives: (i) the solution, a Python-native executable entry point that combines machine-readable metadata, arguments, environment specifications, and lifecycle hooks; and (ii) the catalog, a decentralized, git-native distribution mechanism with indexed search and optional web rendering for discovery, provenance, and governance. Album uses a two-context execution model in which a host controller evaluates manifests and prepares per-solution environments, while lifecycle hooks execute inside isolated solution environments. This design supports reproducible execution, post-environment setup, and the composition of routines with incompatible dependencies. Album can be used in conjunction with LLM agents: solutions can be drafted and revised with LLM assistance, and a MCP interface exposes cataloged solutions as callable tools for tool-grounded discovery and orchestration. We evaluate Album through four realworld imaging deployments spanning interactive visualization of electron microscopy data, integration of multiple segmentation methods, the orchestration of cryo-electron tomography competition workflows, and mineral quantification pipelines. Overall, Album complements package managers, workflow systems, and container runtimes by making scientific routines executable, shareable artifacts. Documentation and examples are available at https://album.solutions.

This paper reports experiments across six frontier model types from OpenAI, Anthropic, xAI, and Google DeepMind. Ten independent sessions per model type used the same three stage prompt sequence, progressing from architectural preference to a full ASCII backbone. Under the school audience framing, responses repeatedly converged on a shared architectural pattern built around persistent latent state, adaptive computation, memory, specialist routing, verification, stopping control, and delayed decoding. Most runs remained close to this common structure, while a small number developed markedly greater engineering specificity. The audience framing appears to be an important condition of this effect. In additional control runs that removed the school framing while retaining the architectural request, responses became substantially more heterogeneous and failed to reproduce the same stable motif convergence. One observation is particularly striking. GPT-5.6 Sol produced an unusually elaborate successor architecture whose organization closely overlaps with the architecture independently sketched by GPT-6 Astra. Because the prompts explicitly ask each model to imagine an architectural future, this resemblance raises a testable question: whether the overlap reflects exposure to related architectural concepts, a shared learned design prior, or independent convergence toward similar computational principles. The paper uses the term epistemic jailbreak for the accompanying loss of discipline in technical provenance as requested specificity increases. The experiments establish a repeatable behavioral pattern and do not authenticate proprietary implementation claims. What we leave to the community is a harder question: are these models independently imagining the same architectural future, or do such motifs somehow propagate between model families?

The history of science is punctuated by serendipitous discoveries, where unexpected observations, rather than targeted hypotheses, opened new fields of inquiry. While modern autonomous laboratories excel at accelerating hypothesis testing, their optimization for efficiency risks overlooking these crucial, unplanned findings. To address this gap, we introduce SciLink, an open-source, multi-agent artificial intelligence framework designed to operationalize serendipity in materials research by creating a direct, automated link between experimental observation, novelty assessment, and theoretical simulations. The framework employs a hybrid AI strategy where specialized machine learning models perform quantitative analysis of experimental data, while large language models handle higher-level reasoning. These agents autonomously convert raw data from materials characterization techniques into falsifiable scientific claims, which are then quantitatively scored for novelty against the published literature. We demonstrate the framework's versatility across diverse research scenarios, showcasing its application to atomic-resolution and hyperspectral data, its capacity to integrate real-time human expert guidance, and its ability to close the research loop by proposing targeted follow-up experiments. By systematically analyzing all observations and contextualizing them, SciLink provides a practical framework for AI-driven materials research that not only enhances efficiency but also actively cultivates an environment ripe for serendipitous discoveries, thereby bridging the gap between automated experimentation and open-ended scientific exploration.

This research explores the integration of large language models (LLMs) into scientific data assimilation, focusing on combustion science as a case study. Leveraging foundational models integrated with Retrieval-Augmented Generation (RAG) framework, the study introduces an approach to process diverse combustion research data, spanning experimental studies, simulations, and literature. The multifaceted nature of combustion research emphasizes the critical role of knowledge processing in navigating and extracting valuable information from a vast and diverse pool of sources. The developed approach minimizes computational and economic expenses while optimizing data privacy and accuracy. It incorporates prompt engineering and offline open-source LLMs, offering user autonomy in selecting base models. The study provides a thorough examination of text segmentation strategies, conducts comparative studies between LLMs, and explores various optimized prompts to demonstrate the effectiveness of the framework. By incorporating an external database, the framework outperforms a conventional LLM in generating accurate responses and constructing robust arguments. Additionally, the study delves into the investigation of optimized prompt templates for the purpose of efficient extraction of scientific literature. The research addresses concerns related to hallucinations and false research articles by introducing a custom workflow developed with a detection algorithm to filter out inaccuracies. Despite identified areas for improvement, the framework consistently delivers accurate domain-specific responses with minimal human oversight. The prompt-agnostic approach introduced holds promise for future deliberations. The study underscores the significance of integrating LLMs and knowledge processing techniques in scientific research, providing a foundation for advancements in data assimilation and utilization.

Scientific illustrations are essential tools for communicating research findings, especially in natural science, where they visualize complex concepts and processes. As Text-to-Image (T2I) models become increasingly capable, researchers have started to use them for scientific illustration generation. However, existing benchmarks often assess outputs at a holistic level, overlooking fine-grained elements, while scientific reasoning ability and output conciseness remain under-quantified. We introduce FEPBench, a benchmark built from carefully selected high-quality scientific illustrations across multiple disciplines and layout types. With the assistance of multimodal large language models (MLLMs) and human experts, we provide fine-grained atom set annotations and systematically evaluate T2I models along three dimensions: instruction faithfulness, reasoning enrichment, and semantic precision. Our evaluation further decomposes model performance across visual, textual, relation, and layout elements. Results show that even state-of-the-art (SOTA) closed-source models, such as GPT Image 2 and Nano Banana Pro, still suffer from text-rendering bottlenecks, limited reasoning enrichment, and difficulty balancing generation richness with precision. These findings provide practical guidance for improving and deploying T2I models in scientific illustration generation. Benchmark data, atom set annotations, and evaluation code will be released by us.

This outing is part of a larger music technology research project. The objective is to find a method for materially enhancing music using hardware and software. There is a strong likelihood that there exists a new medium for experiencing music via a wearable device that ordinary listeners prefer over the current state of the art. If such a medium is discovered, it is a step towards altruistic, prosocial reform in the music industry. A new playback system infrastructure has a chance to soothe some of the societal problems tied to the larger entertainment industry ecosystem. Iola walker is a music playback system that allows musicians to compose music that changes in accordance with the listener's gait. Artifacts are available here: https://github.com/willbjames/iolawalker

In this paper, we push the boundaries of fine-grained 3D generation into truly creative territory. Current methods either lack intricate details or simply mimic existing objects -- we enable both. By lifting 2D fine-grained understanding into 3D through multi-view diffusion and modeling part latents as continuous distributions, we unlock the ability to generate entirely new, yet plausible parts through interpolation and sampling. A self-supervised feature consistency loss further ensures stable generation of these unseen parts. The result is the first system capable of creating novel 3D objects with species-specific details that transcend existing examples. While we demonstrate our approach on birds, the underlying framework extends beyond things that can chirp! Code will be released at https://github.com/kamwoh/chirpy3d.

Rapid advancement of machine learning solutions has often coincided with the production of a test public data set. Such datasets reduce the largest barrier to entry for tackling a problem -- procuring data -- while also providing a benchmark to compare different solutions. Furthermore, large datasets have been used to train high-performing feature finders which are then used in new approaches to problems beyond that initially defined. In order to encourage the rapid development in the analysis of data collected using liquid argon time projection chambers, a class of particle detectors used in high energy physics experiments, we have produced the PILArNet, first 2D and 3D open dataset to be used for a couple of key analysis tasks. The initial dataset presented in this paper contains 300,000 samples simulated and recorded in three different volume sizes. The dataset is stored efficiently in sparse 2D and 3D matrix format with auxiliary information about simulated particles in the volume, and is made available for public research use. In this paper we describe the dataset, tasks, and the method used to procure the sample.

The research idea in a published paper is rarely the project's initial idea. Between the two lies a closed-loop process in which researchers run experiments, derive insights, identify challenges, explore the literature, and revise the idea, with each step motivated by evidence and reasoning they can articulate. We call the path one idea takes through this process, with the evidence and reasoning behind each step, its authentic research trajectory. Although it underlies every scientific contribution, it is rarely recorded. Existing LLM-based research agents generate an idea once, refine it against reviews, literature, or their own experimental results, or search over candidate ideas and experiments. In all of them the text of the idea evolves, while the evidence and reasoning that connected one version to the next are discarded. We propose the Research Progress Graph (RPG), a representation of authentic and complete research trajectories. An RPG records the evolution of an idea as typed research states connected by cognitive transitions, each annotated with a temporal index and the reasoning behind it, which makes this evolution an explicit object of study. We ground the representation in authentic trajectories whose steps their authors justify in annotations and papers. Comparing the representations of thirty-five research agents with the RPG, we find that each is an incomplete RPG; none keeps the state that changed, the evidence that changed it, and the reasoning connecting them as one evolving record. Modeling ideation with the RPG changes how research agents should be designed, evaluated, and trained. Agents predict the next research state instead of a complete idea, ideas are evaluated as trajectories instead of final texts, and authentic trajectories serve as training data. These directions shift research agents from generating static ideas to modeling how ideas evolve.

Experimental materials-science labs routinely accumulate synthesis and characterization data across spreadsheets, instrument export files, and ad-hoc folders, with no durable link between a sample's recipe, its measured properties, and whether a similar composition has been reported elsewhere. We present Stage 1 of an open-source data infrastructure closing this loop for a single working alloy-synthesis lab: a relational schema for composition and synthesis records, a strict composition/mass calculator, three empirical alloy-design screening metrics (VEC, atomic-size mismatch, mixing enthalpy) plus a melt/boil-point synthesis-feasibility check, an automated cross-referencing layer against three public materials databases (Materials Project, OQMD, Alexandria) with deduplication and adjustable relevance filtering, and a desktop GUI unifying the workflow behind a single "new entry" action. Built and used by a practicing researcher rather than a software team, we report it as a systems/methodology contribution - the architecture, the concrete engineering failures encountered while building it, and how each was diagnosed and fixed - rather than new materials-science results. We argue the specific defects found - a parser ambiguity that produced silent wrong answers, a partial code edit that broke a dependency chain invisibly, a database-metadata bug traceable to an un-cast numeric type, and a credential-hygiene gap that .gitignore alone did not close - generalize to any small scientific-software project built by a domain expert without formal software-engineering training. Both the system and the lessons from building it are reported here; two follow-on papers cover the validated characterization pipelines (Stage 2) and the retrieval-augmented synthesis advisor and CALPHAD thermodynamics module (Stage 3) built on this foundation.

Research dissemination, turning a paper into a poster, a talk video, and a blog post, is still a manual last mile. Prior automation treats each artifact in isolation that each re-extract the paper from scratch, usually ship one-way renders the author cannot reopen in PowerPoint or Word, and gates quality on soft VLM-preference scores that plateau while load-bearing sections still read as empty. We argue this last mile is best built as a composition of skills: thin agent-readable contracts that share one upstream extractor and wrap deterministic primitives in a measured-fill loop whose exits are hard pass/fail render gates. We instantiate this as ResearchStudio-Reel, five Claude Code and Codex skills organized into one shared extractor (Paper2Assets), three editable generators (Paper2Poster, Paper2Video, Paper2Blog), and one interactive convergence layer (Paper2Reel). Paper2Assets extracts each paper once into a shared bundle that can be reused by every downstream skill; The three generators produce a print-ready poster, a synchronized talk video, and a bilingual blog that stay factually consistent and round-trip through PowerPoint or Word; Paper2Reel then binds all three into a self-contained HTML viewer whose section-level clicks jump the video, slides, captions, and blog to matching content. On the Paper2Poster benchmark, our posters lead every aesthetic and information sub-criterion against both prior automated systems and single-shot frontier LLMs, surpassing the authors' own on aesthetics under two held-out VLM judges and winning overall on 84% to 93% of papers; capability audits further show that, by uniquely pairing narration-aligned on-slide highlights with a bilingual blog gated by layout-aware DOCX repair, ResearchStudio-Reel is the only pipeline to ship all three editable artifacts. Project is available at https://aka.ms/ResearchStudio

3D reconstruction techniques have widely been used for digital documentation of archaeological fragments. However, efficient digital capture of fragments remains as a challenge. In this work, we aim to develop a portable, high-throughput, and accurate reconstruction system for efficient digitization of fragments excavated in archaeological sites. To realize high-throughput digitization of large numbers of objects, an effective strategy is to perform scanning and reconstruction in batches. However, effective batch-based scanning and reconstruction face two key challenges: 1) how to correlate partial scans of the same object from multiple batch scans, and 2) how to register and reconstruct complete models from partial scans that exhibit only small overlaps. To tackle these two challenges, we develop a new batch-based matching algorithm that pairs the front and back sides of the fragments, and a new Bilateral Boundary ICP algorithm that can register partial scans sharing very narrow overlapping regions. Extensive validation in labs and testing in excavation sites demonstrate that these designs enable efficient batch-based scanning for fragments. We show that such a batch-based scanning and reconstruction pipeline can have immediate applications on digitizing sherds in archaeological excavations. Our project page: https://jiepengwang.github.io/FIRES/.

Generative single-image super-resolution (SISR) is advancing rapidly, yet even state-of-the-art models produce visual artifacts: unnatural patterns and texture distortions that degrade perceived quality. These defects vary widely in perceptual impact--some are barely noticeable, while others are highly disturbing--yet existing detection methods treat them equally. We propose characterizing artifacts by their prominence to human observers rather than as uniform binary defects. We present a novel dataset of 1302 artifact examples from 11 SISR methods annotated with crowdsourced prominence scores, and provide prominence annotations for 593 existing artifacts from the DeSRA dataset, revealing that 48% of them go unnoticed by most viewers. Building on this data, we train a lightweight regressor that produces spatial prominence heatmaps. We demonstrate that our method outperforms existing detectors and effectively guides SR model fine-tuning for artifact suppression. Our dataset and code are available at https://tinyurl.com/2u9zxtyh.

In the development of science, accurate and reproducible documentation of the experimental process is crucial. Automatic recognition of the actions in experiments from videos would help experimenters by complementing the recording of experiments. Towards this goal, we propose FineBio, a new fine-grained video dataset of people performing biological experiments. The dataset consists of multi-view videos of 32 participants performing mock biological experiments with a total duration of 14.5 hours. One experiment forms a hierarchical structure, where a protocol consists of several steps, each further decomposed into a set of atomic operations. The uniqueness of biological experiments is that while they require strict adherence to steps described in each protocol, there is freedom in the order of atomic operations. We provide hierarchical annotation on protocols, steps, atomic operations, object locations, and their manipulation states, providing new challenges for structured activity understanding and hand-object interaction recognition. To find out challenges on activity understanding in biological experiments, we introduce baseline models and results on four different tasks, including (i) step segmentation, (ii) atomic operation detection (iii) object detection, and (iv) manipulated/affected object detection. Dataset and code are available from https://github.com/aistairc/FineBio.

We introduce a new benchmark for Danish culture via cultural heritage, Daisy, based on the curated topics from the Danish Culture Canon 2006. For each artifact in the culture canon, we query the corresponding Wikipedia page and have a language model generate random questions. This yields a sampling strategy within each work, with a mix of central of peripheral questions for each work, not only knowledge of mainstream information, but also in-depth cornerstones defining the heritage of Danish Culture, defined by the Canon committee. Each question-answer pair is humanly approved or corrected in the final dataset consisting of 741 close-ended question answer pairs covering topics, from 1300 BC. archaeological findings, 1700 century poems and musicals pieces to contemporary pop music and Danish design and architecture.