Daily Papers

Vision-language-action (VLA) policies often fail when a robot's executed motion deviates from their commanded action. Such execution errors arise from the robot's mechanics and operating conditions, such as wear and payload changes. We propose self-compensating VLA, a deployment-time adaptation method that enables a VLA policy to pre-compensate for the robot's execution errors when generating commands. Without task rewards or labels, it updates the policy online using the residual between the action commanded by a VLA and the motion executed by the robot. To stress-test VLA robustness across execution conditions that are impractical to cover with physical robots alone, we introduce RoboStress, a controlled simulation benchmark. It combines established joint-level models of friction, backlash, compliance, and gravity-compensation error into seven deployment scenarios whose execution errors depend on the robot's state and motion history. On RoboStress, self-compensating VLA achieves higher average task success than both the base policies and methods that build in robustness during training. On two physical robot arms with different usage histories, it raises the average task success rate by more than 30 percentage points on each arm, and the gains extend to objects not seen in the task demonstrations.

Video generators are increasingly evaluated as potential world models, which requires them to encode and understand physical laws. We investigate their representation of a fundamental law: gravity. Out-of-the-box video generators consistently generate objects falling at an effectively slower acceleration. However, these physical tests are often confounded by ambiguous metric scale. We first investigate if observed physical errors are artifacts of these ambiguities (e.g., incorrect frame rate assumptions). We find that even temporal rescaling cannot correct the high-variance gravity artifacts. To rigorously isolate the underlying physical representation from these confounds, we introduce a unit-free, two-object protocol that tests the timing ratio t_1^2/t_2^2 = h_1/h_2, a relationship independent of g, focal length, and scale. This relative test reveals violations of Galileo's equivalence principle. We then demonstrate that this physical gap can be partially mitigated with targeted specialization. A lightweight low-rank adaptor fine-tuned on only 100 single-ball clips raises g_{eff} from 1.81,m/s^2 to 6.43,m/s^2 (reaching 65% of terrestrial gravity). This specialist adaptor also generalizes zero-shot to two-ball drops and inclined planes, offering initial evidence that specific physical laws can be corrected with minimal data.

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within pm 2%. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

We present a novel method for recovering world-grounded human motion from monocular video. The main challenge lies in the ambiguity of defining the world coordinate system, which varies between sequences. Previous approaches attempt to alleviate this issue by predicting relative motion in an autoregressive manner, but are prone to accumulating errors. Instead, we propose estimating human poses in a novel Gravity-View (GV) coordinate system, which is defined by the world gravity and the camera view direction. The proposed GV system is naturally gravity-aligned and uniquely defined for each video frame, largely reducing the ambiguity of learning image-pose mapping. The estimated poses can be transformed back to the world coordinate system using camera rotations, forming a global motion sequence. Additionally, the per-frame estimation avoids error accumulation in the autoregressive methods. Experiments on in-the-wild benchmarks demonstrate that our method recovers more realistic motion in both the camera space and world-grounded settings, outperforming state-of-the-art methods in both accuracy and speed. The code is available at https://zju3dv.github.io/gvhmr/.

Point cloud registration is challenging in the presence of heavy outlier correspondences. This paper focuses on addressing the robust correspondence-based registration problem with gravity prior that often arises in practice. The gravity directions are typically obtained by inertial measurement units (IMUs) and can reduce the degree of freedom (DOF) of rotation from 3 to 1. We propose a novel transformation decoupling strategy by leveraging screw theory. This strategy decomposes the original 4-DOF problem into three sub-problems with 1-DOF, 2-DOF, and 1-DOF, respectively, thereby enhancing the computation efficiency. Specifically, the first 1-DOF represents the translation along the rotation axis and we propose an interval stabbing-based method to solve it. The second 2-DOF represents the pole which is an auxiliary variable in screw theory and we utilize a branch-and-bound method to solve it. The last 1-DOF represents the rotation angle and we propose a global voting method for its estimation. The proposed method sequentially solves three consensus maximization sub-problems, leading to efficient and deterministic registration. In particular, it can even handle the correspondence-free registration problem due to its significant robustness. Extensive experiments on both synthetic and real-world datasets demonstrate that our method is more efficient and robust than state-of-the-art methods, even when dealing with outlier rates exceeding 99%.

Modern feed-forward 3D reconstruction methods like VGGT predict pixel-aligned pointmaps in camera-centric coordinate frames. However, this choice of coordinate frame is not always optimal. We propose instead to predict pointmaps in upright, gravity-aligned frames that exploit strong structural cues present in many real-world scenes. Unlike camera-centric frames, gravity-aligned frames share a common vertical axis across viewpoints, reducing the rotational degrees of freedom needed to relate pointmaps to one another. To this end, we introduce the Gravity Grounded Geometry Transformer (G3T), fine-tuned from existing models on gravity-aligned 3D data. G3T produces highly accurate gravity-aware predictions, including upright pointmaps and camera-to-gravity poses. We further introduce G3T-Long, a submap-based incremental 3D reconstruction pipeline that leverages the reduced rotational degrees of freedom afforded by upright frames to achieve significantly improved reconstruction accuracy.

We present an experimental analysis on the use of a camera-based approach for high-altitude navigation by associating mapped landmarks from a satellite image database to camera images, and by leveraging inertial sensors between camera frames. We evaluate performance of both a sideways-tilted and downward-facing camera on data collected from a World View Enterprises high-altitude balloon with data beginning at an altitude of 33 km and descending to near ground level (4.5 km) with 1.5 hours of flight time. We demonstrate less than 290 meters of average position error over a trajectory of more than 150 kilometers. In addition to showing performance across a range of altitudes, we also demonstrate the robustness of the Terrain Relative Navigation (TRN) method to rapid rotations of the balloon, in some cases exceeding 20 degrees per second, and to camera obstructions caused by both cloud coverage and cords swaying underneath the balloon. Additionally, we evaluate performance on data collected by two cameras inside the capsule of Blue Origin's New Shepard rocket on payload flight NS-23, traveling at speeds up to 880 km/hr, and demonstrate less than 55 meters of average position error.

We introduce Gravity, another algorithm for gradient-based optimization. In this paper, we explain how our novel idea change parameters to reduce the deep learning model's loss. It has three intuitive hyper-parameters that the best values for them are proposed. Also, we propose an alternative to moving average. To compare the performance of the Gravity optimizer with two common optimizers, Adam and RMSProp, five standard datasets were trained on two VGGNet models with a batch size of 128 for 100 epochs. Gravity hyper-parameters did not need to be tuned for different models. As will be explained more in the paper, to investigate the direct impact of the optimizer itself on loss reduction no overfitting prevention technique was used. The obtained results show that the Gravity optimizer has more stable performance than Adam and RMSProp and gives greater values of validation accuracy for datasets with more output classes like CIFAR-100 (Fine).

Converting multi-view RGB observations into simulation-ready 3D environments remains challenging because current reconstruction pipelines produce monolithic scene representations without explicit physical structure. They are typically defined up to an arbitrary global rotation and entangle rigid foreground objects with background geometry, which hinders stable physical interaction. Existing solutions often recover interactivity by replacing reconstructed objects with retrieved CAD assets, but this introduces a slow retrieval-and-replacement stage and weakens scene-specific geometric fidelity. We propose GARDEN, an RGB-only framework that reformulates reconstruction as physically-grounded scene factorization and outputs a structured hybrid scene representation. The key idea is to use gravity as a universal physical prior: we first align the reconstruction to a unified Gravity-View frame to resolve gauge ambiguity, then recover object-centric rigid meshes with accurate 6-DoF placement, and finally remove duplicate object geometry from the background through conditional 3D point classification. The resulting representation combines explicit rigid bodies with a decoupled background, enabling direct physics simulation while preserving visual realism. Experiments on both simulated and real multi-view scenes show that GARDEN improves object placement reliability, disentanglement quality, and rendering-simulation efficiency compared with retrieval-based baselines.

We tackle the problem of estimating a Manhattan frame, i.e. three orthogonal vanishing points, and the unknown focal length of the camera, leveraging a prior vertical direction. The direction can come from an Inertial Measurement Unit that is a standard component of recent consumer devices, e.g., smartphones. We provide an exhaustive analysis of minimal line configurations and derive two new 2-line solvers, one of which does not suffer from singularities affecting existing solvers. Additionally, we design a new non-minimal method, running on an arbitrary number of lines, to boost the performance in local optimization. Combining all solvers in a hybrid robust estimator, our method achieves increased accuracy even with a rough prior. Experiments on synthetic and real-world datasets demonstrate the superior accuracy of our method compared to the state of the art, while having comparable runtimes. We further demonstrate the applicability of our solvers for relative rotation estimation. The code is available at https://github.com/cvg/VP-Estimation-with-Prior-Gravity.

In this work we propose an analytical model that reproduces the core-bounds phase of gravitational waves (GW) of Rapidly Rotating (RR) from Core Collapse Supernovae (CCSNe), as a function of three parameters, the arrival time tau, the ratio of the kinetic and potential energy beta and a phenomenological parameter alpha related to rotation and equation of state (EOS). To validate the model we use 126 waveforms from the Richers catalog Richers_2017 selected with the criteria of exploring a range of rotation profiles, and involving EOS. To quantify the degree of accuracy of the proposed model, with a particular focus on the rotation parameter beta, we show that the average Fitting Factor (FF) between the simulated waveforms with the templates is 94.4\%. In order to estimate the parameters we propose a frequentist matched filtering approach in real interferometric noise which does not require assigning any priors. We use the Matched Filter (MF) technique, where we inject a bank of templates considering simulated colored Gaussian noise and the real noise of O3L1. For example for A300w6.00\_BHBLP at 10Kpc we obtain a standar deviation of sigma = 3.34times 10^{-3} for simulated colored Gaussian noise and sigma= 1.46times 10^{-2} for real noise. On the other hand, from the asymptotic expansion of the variance we obtain the theoretical minimum error for beta at 10 kpc and optimal orientation. The estimation error in this case is from 10^{-2} to 10^{-3} as beta increases. We show that the results of the estimation error of beta for the 3-parameter space (3D) is consistent with the single-parameter space (1D), which allows us to conclude that beta is decoupled from the others two parameters.

Scientific machine learning and the advent of the Physics-Informed Neural Network (PINN) show considerable potential in their capacity to identify solutions to complex differential equations. Over the past two years, much work has gone into the development of PINNs capable of solving the gravity field modeling problem -- i.e.\ learning a differentiable form of the gravitational potential from position and acceleration estimates. While the past PINN gravity models (PINN-GMs) have demonstrated advantages in model compactness, robustness to noise, and sample efficiency; there remain key modeling challenges which this paper aims to address. Specifically, this paper introduces the third generation of the Physics-Informed Neural Network Gravity Model (PINN-GM-III) which solves the problems of extrapolation error, bias towards low-altitude samples, numerical instability at high-altitudes, and compliant boundary conditions through numerous modifications to the model's design. The PINN-GM-III is tested by modeling a known heterogeneous density asteroid, and its performance is evaluated using seven core metrics which showcases its strengths against its predecessors and other analytic and numerical gravity models.

Lower numerical precision reduces storage and memory traffic but raises the perturbation floor. We study rank compensation: reinvesting saved memory in a larger approximation rank. For matrices, the singular-value error identity yields a directly testable sufficient condition requiring the additional singular component to offset the perturbation from storing the rank-augmented approximation in lower precision. On ten SuiteSparse matrices, all 100 truncation-dominated configurations (50 FP32 and 50 FP16) are certified non-increases and strict accuracy wins, with mean error ratio 0.963 and storage ratios 58.8% and 29.4% relative to the FP64 baseline. FP16 failures occur only in tail-rank stress tests near the perturbation floor. At the largest resident matrix-application batch, compensated FP32 and FP16 achieve geometric-mean A100 speedups of 1.28times and 2.12times; neither accelerates the smallest batch. For Tensor-Train (TT) approximation, we give a conditional a posteriori extension based on the measured truncation gain and rounded-core perturbation. Across three-way and six-way synthetic tests, FP32 and FP16 achieve combined accuracy-memory wins in 10 of 20 and 14 of 20 trials. On public hyperspectral tensors and FROSTT top-active subtensors, the corresponding counts are 44 of 60 and 54 of 60; four FP16 Salinas-A tail-stress cases fail. No certified TT case exceeds the FP64 error beyond numerical tolerance. Reconstruction of six public tensors yields geometric-mean compensated speedups of 1.38times (FP32) and 1.94times (FP16). Timings cover resident downstream kernels, not factorization, transfers, or end-to-end acceleration.

Reconstructing interactive, simulation-ready 3D scenes from a single image is a critical bottleneck for robotic manipulation. While recent single-image lifters recover plausible per-object shapes, composing them yields scenes that collapse under physical simulation due to interpenetrating, hovering, or sinking objects. Existing physics-aware methods address this strictly as a post-hoc layout correction, leaving the underlying geometric errors unresolved. To address this, we introduce SimuScene, a compositional 3D reconstruction pipeline that puts physics in the loop of shape and layout estimation. Rather than using physics merely for layout cleanup, we utilize the physics engine as a diagnostic measurement tool during the generative process itself. By diagnostically simulating reconstructed objects under gravity, we convert penetration and support failures into quantitative correction signals that drive gravity-axis stretching and amodal shape resampling. This physics-informed feedback loop mitigates accumulated reconstruction errors and produces a stable, simulation-ready compositional 3D scene. Extensive experiments demonstrate state-of-the-art performance on physical stability and geometric alignment benchmarks. We further highlight SimuScene's utility by deploying reconstructed environments in humanoid control and robot-arm manipulation tasks.

We introduce GraviBERT, a novel deep learning framework for gravitational wave inference, built on a multi-scale feature extractor with a transformer encoder and a suitable regression head. A key novelty of GraviBERT is its staged training: a BERT-style self-supervised pretraining phase to learn transferable representations, followed by supervised fine-tuning on labeled data. GraviBERT demonstrates consistent transfer learning across detector configurations and waveform models. On in-domain data, pretraining reduces the MAE by up to 31% and accelerates convergence by sim 6.6 times, with mean relative precision for point estimates reaching the few-percent level and MAE in effective spin of sim 10^{-3} at SNR = 10. For domain adaptation to new detector noise profiles, the pretrained model converges up to 15times faster on small target datasets and reduces estimation errors by up to sim 47%, demonstrating detector-agnostic learning. Cross-waveform approximant transfer achieves up to 44% MAE reductions and up to 15times training speedups, with R^2 scores consistently exceeding 0.9 for mass parameters at SNR = 10 compared to 0.74 - 0.87 when training from scratch. GraviBERT works directly with noisy waveforms, and in its current form quantifies predictive uncertainty through MC dropouts. After pretraining, the regression head could be adapted to multiple downstream inference tasks in gravitational-wave astronomy.

Large-scale humanoid motion-tracking controllers are commonly improved by reallocating training effort: difficult motions are sampled more often, isolated into smaller subsets, or assigned to specialized experts. We show that this view is incomplete. In strong whole-body-control baselines, a residual set of feasible training clips remains unsolved even under targeted training, especially for high-dynamic transitions and balance-critical motions. These failures arise not only from insufficient exposure, but from a mismatch between the motion demands and the effective capability induced by the default training recipe. We propose Athena-WBC, a compact teacher-student pipeline with capability-aligned policy experts for long-tail humanoid whole-body control. Dynamic experts use a tracking-focused, constraint-aware objective that removes conservative effort and temporal-control penalties while preserving physical feasibility constraints; balance experts use a gravity curriculum to improve early-training survivability. The resulting privileged teachers are motion-routed for DAgger distillation and then compressed into a single controller with deployable observations followed by RL fine-tuning. Experiments on a full-size humanoid show improved recovery of training-set long-tail motions and better held-out tracking than a strong SONIC-recipe baseline, using only a small number of experts.

Unmodeled aerodynamic disturbances pose a key challenge for multirotor flight when multiple vehicles are in close proximity to each other. However, certain missions require two multirotors to approach each other within 1-2 body-lengths of each other and hold formation -- we consider one such practical instance: vertically docking two multirotors in the air. In this leader-follower setting, the follower experiences significant downwash interference from the leader in its final docking stages. To compensate for this, we employ a learnt downwash model online within an optimal feedback controller to accurately track a docking maneuver and then hold formation. Through real-world flights with different maneuvers, we demonstrate that this compensation is crucial for reducing the large vertical separation otherwise required by conventional/naive approaches. Our evaluations show a tracking error of less than 0.06m for the follower (a 3-4x reduction) when approaching vertically within two body-lengths of the leader. Finally, we deploy the complete system to effect a successful physical docking between two airborne multirotors in a single smooth planned trajectory.

We present a comprehensive framework for fusing measurements from multiple and generally placed accelerometers and gyroscopes to perform inertial navigation. Using the angular acceleration provided by the accelerometer array, we show that the numerical integration of the orientation can be done with second-order accuracy, which is more accurate compared to the traditional first-order accuracy that can be achieved when only using the gyroscopes. Since orientation errors are the most significant error source in inertial navigation, improving the orientation estimation reduces the overall navigation error. The practical performance benefit depends on prior knowledge of the inertial sensor array, and therefore we present four different state-space models using different underlying assumptions regarding the orientation modeling. The models are evaluated using a Lie Group Extended Kalman filter through simulations and real-world experiments. We also show how individual accelerometer biases are unobservable and can be replaced by a six-dimensional bias term whose dimension is fixed and independent of the number of accelerometers.

In the era of mega-constellations, the need for accurate and publicly available information has become fundamental for satellite operators to guarantee the safety of spacecrafts and the Low Earth Orbit (LEO) space environment. This study critically evaluates the accuracy and reliability of publicly available ephemeris data for a LEO mega-constellation - Starlink. The goal of this work is twofold: (i) compare and analyze the quality of the data against high-precision numerical propagation. (ii) Leverage Physics-Informed Machine Learning to extract relevant satellite quantities, such as non-conservative forces, during the decay process. By analyzing two months of real orbital data for approximately 1500 Starlink satellites, we identify discrepancies between high precision numerical algorithms and the published ephemerides, recognizing the use of simplified dynamics at fixed thresholds, planned maneuvers, and limitations in uncertainty propagations. Furthermore, we compare data obtained from multiple sources to track and analyze deorbiting satellites over the same period. Empirically, we extract the acceleration profile of satellites during deorbiting and provide insights relating to the effects of non-conservative forces during reentry. For non-deorbiting satellites, the position Root Mean Square Error (RMSE) was approximately 300 m, while for deorbiting satellites it increased to about 600 m. Through this in-depth analysis, we highlight potential limitations in publicly available data for accurate and robust Space Situational Awareness (SSA), and importantly, we propose a data-driven model of satellite decay in mega-constellations.

Modern science emerged from reasoning over repeatedly-observed planetary motions. We present Gravity-Bench-v1, an environment-based benchmark that challenges AI agents on tasks that parallel this historical development. Gravity-Bench-v1 evaluates agents on the discovery of physics concealed within a dynamic environment, using rigorous gravitational dynamics simulations. Gravity-Bench includes out-of-distribution cases, i.e. with physics that deviates from the real world, to evaluate true scientific generalization capabilities. Agents must plan to collect data within an experimental budget and must perform a dynamic form of data analysis and reasoning to solve tasks efficiently. Our benchmark admits an open-ended space of solutions. PhD-level solutions for each task are provided, to calibrate AI performance against human expertise. Technically at an upper-undergraduate level, our benchmark proves challenging to baseline AI agents. Gravity-Bench-v1 and planned extensions should help map out AI progress towards scientific discovery capabilities.

We present an end-to-end pipeline for estimating stellar parameters from Sloan Digital Sky Survey Data Release 12 spectra using a fully connected multitask neural network with residual blocks, whose hyperparameters are tuned via Bayesian optimization. The preprocessing pipeline includes per-spectrum standardization, RobustScaler normalization of the target variables -- effective temperature T_{eff}, metallicity [Fe/H], and surface gravity log g -- and data augmentation via Gaussian noise injection. On a held-out test set, the model achieved Mean Absolute Errors (MAE) of 59.76~K for T_{eff}, 0.103~dex for [Fe/H], and 0.130~dex for log g. Normalized against the full-scale range of each parameter, these results represent range-normalized errors between 1% and 3%, achieved with a highly efficient model complexity of approximately 540,000 trainable parameters. These results demonstrate that a compact residual multitask architecture, combined with principled signal preprocessing, provides a parameter-efficient solution for nonlinear parameter estimation in large-scale spectral datasets. In particular, the proposed model achieves competitive performance with substantially lower complexity than deeper neural network baselines.

RTK-SLAM systems integrate simultaneous localization and mapping (SLAM) with real-time kinematic (RTK) GNSS positioning, promising both relative consistency and globally referenced coordinates for efficient georeferenced surveying. A critical and underappreciated issue is that the standard evaluation metric, Absolute Trajectory Error (ATE), first fits an optimal rigid-body transformation between the estimated trajectory and reference before computing errors. This so-called SE(3) alignment absorbs global drift and systematic errors, making trajectories appear more accurate than they are in practice, and is unsuitable for evaluating the global accuracy of RTK-SLAM. We present a geodetically referenced dataset and evaluation methodology that expose this gap. A key design principle is that the RTK receiver is used solely as a system input, while ground truth is established independently via a geodetic total station. This separation is absent from all existing datasets, where GNSS typically serves as (part of) the ground truth. The dataset is collected with a handheld RTK-SLAM device, comprising two scenes. We evaluate LiDAR-inertial, visual-inertial, and LiDAR-visual-inertial RTK-SLAM systems alongside standalone RTK, reporting direct global accuracy and SE(3)-aligned relative accuracy to make the gap explicit. Results show that SE(3) alignment can underestimate absolute positioning error by up to 76\%. RTK-SLAM achieves centimeter-level absolute accuracy in open-sky conditions and maintains decimeter-level global accuracy indoors, where standalone RTK degrades to tens of meters. The dataset, calibration files, and evaluation scripts are publicly available at https://rtk-slam-dataset.github.io/.

Methods based on weight compensation, which iteratively apply quantization and weight compensation to minimize the output error, have recently demonstrated remarkable success in quantizing Large Language Models (LLMs). The representative work, GPTQ, introduces several key techniques that make such iterative methods practical for LLMs with billions of parameters. GPTAQ extends this approach by introducing an asymmetric calibration process that aligns the output of each quantized layer with its full-precision counterpart, incorporating a residual error into the weight compensation framework. In this work, we revisit the formulation of the residual error. We identify a sub-optimal calibration objective in existing methods: during the intra-layer calibration process, they align the quantized output with the output from compensated weights, rather than the true output from the original full-precision model. Therefore, we redefine the objective to precisely align the quantized model's output with the original output of the full-precision model at each step. We then reveal that the residual error originates not only from the output difference of the preceding layer but also from the discrepancy between the compensated and original weights within each layer, which we name the 'compensation-aware error'. By inheriting the neuron decomposition technique from GPTAQ, we can efficiently incorporate this compensation-aware error into the weight update process. Extensive experiments on various LLMs and quantization settings demonstrate that our proposed enhancements integrate seamlessly with both GPTQ and GPTAQ, significantly improving their quantization performance. Our code is publicly available at https://github.com/list0830/ResComp.

In this paper, we explore a novel approach to 3D anomaly detection (AD) that goes beyond merely identifying anomalies based on structural characteristics. Our primary perspective is that most anomalies arise from unpredictable defective forces originating from both internal and external sources. To address these anomalies, we seek out opposing forces that can help correct them. Therefore, we introduce the Mechanics Complementary Model-based Framework for the 3D-AD task (MC4AD), which generates internal and external corrective forces for each point. We first propose a Diverse Anomaly-Generation (DA-Gen) module designed to simulate various types of anomalies. Next, we present the Corrective Force Prediction Network (CFP-Net), which uses complementary representations for point-level analysis to simulate the different contributions from internal and external corrective forces. To ensure the corrective forces are constrained effectively, we have developed a combined loss function that includes a new symmetric loss and an overall loss. Notably, we implement a Hierarchical Quality Control (HQC) strategy based on a three-way decision process and contribute a dataset titled Anomaly-IntraVariance, which incorporates intraclass variance to evaluate our model. As a result, the proposed MC4AD has been proven effective through theory and experimentation. The experimental results demonstrate that our approach yields nine state-of-the-art performances, achieving optimal results with minimal parameters and the fastest inference speed across five existing datasets, in addition to the proposed Anomaly-IntraVariance dataset. The source is available at https://github.com/hzzzzzhappy/MC4AD

Earth system models suffer from various structural and parametric errors in their representation of nonlinear, multi-scale processes, leading to uncertainties in their long-term projections. The effects of many of these errors (particularly those due to fast physics) can be quantified in short-term simulations, e.g., as differences between the predicted and observed states (analysis increments). With the increase in the availability of high-quality observations and simulations, learning nudging from these increments to correct model errors has become an active research area. However, most studies focus on using neural networks, which while powerful, are hard to interpret, are data-hungry, and poorly generalize out-of-distribution. Here, we show the capabilities of Model Error Discovery with Interpretability and Data Assimilation (MEDIDA), a general, data-efficient framework that uses sparsity-promoting equation-discovery techniques to learn model errors from analysis increments. Using two-layer quasi-geostrophic turbulence as the test case, MEDIDA is shown to successfully discover various linear and nonlinear structural/parametric errors when full observations are available. Discovery from spatially sparse observations is found to require highly accurate interpolation schemes. While NNs have shown success as interpolators in recent studies, here, they are found inadequate due to their inability to accurately represent small scales, a phenomenon known as spectral bias. We show that a general remedy, adding a random Fourier feature layer to the NN, resolves this issue enabling MEDIDA to successfully discover model errors from sparse observations. These promising results suggest that with further development, MEDIDA could be scaled up to models of the Earth system and real observations.

Many problems in astrophysics cover multiple orders of magnitude in spatial and temporal scales. While simulating systems that experience rapid changes in these conditions, it is essential to adapt the (time-) step size to capture the behavior of the system during those rapid changes and use a less accurate time step at other, less demanding, moments. We encounter three problems with traditional methods. Firstly, making such changes requires expert knowledge of the astrophysics as well as of the details of the numerical implementation. Secondly, some parameters that determine the time-step size are fixed throughout the simulation, which means that they do not adapt to the rapidly changing conditions of the problem. Lastly, we would like the choice of time-step size to balance accuracy and computation effort. We address these challenges with Reinforcement Learning by training it to select the time-step size dynamically. We use the integration of a system of three equal-mass bodies that move due to their mutual gravity as an example of its application. With our method, the selected integration parameter adapts to the specific requirements of the problem, both in terms of computation time and accuracy while eliminating the expert knowledge needed to set up these simulations. Our method produces results competitive to existing methods and improve the results found with the most commonly-used values of time-step parameter. This method can be applied to other integrators without further retraining. We show that this extrapolation works for variable time-step integrators but does not perform to the desired accuracy for fixed time-step integrators.

Magnetic navigation (MagNav) is a rising alternative to the Global Positioning System (GPS) and has proven useful for aircraft navigation. Traditional aircraft navigation systems, while effective, face limitations in precision and reliability in certain environments and against attacks. Airborne MagNav leverages the Earth's magnetic field to provide accurate positional information. However, external magnetic fields induced by aircraft electronics and Earth's large-scale magnetic fields disrupt the weaker signal of interest. We introduce a physics-informed approach using Tolles-Lawson coefficients for compensation and Liquid Time-Constant Networks (LTCs) to remove complex, noisy signals derived from the aircraft's magnetic sources. Using real flight data with magnetometer measurements and aircraft measurements, we observe up to a 64% reduction in aeromagnetic compensation error (RMSE nT), outperforming conventional models. This significant improvement underscores the potential of a physics-informed, machine learning approach for extracting clean, reliable, and accurate magnetic signals for MagNav positional estimation.

The spin of the supermassive black hole that resides at the Galactic Centre can in principle be measured by accurate measurements of the orbits of stars that are much closer to SgrA* than S2, the orbit of which recently provided the measurement of the gravitational redshift and the Schwarzschild precession. The GRAVITY near-infrared interferometric instrument combining the four 8m telescopes of the VLT provides a spatial resolution of 2-4 mas, breaking the confusion barrier for adaptive-optics-assisted imaging with a single 8-10m telescope. We used GRAVITY to observe SgrA* over a period of six months in 2019 and employed interferometric reconstruction methods developed in radio astronomy to search for faint objects near SgrA*. This revealed a slowly moving star of magnitude 18.9 in K band within 30mas of SgrA*. The position and proper motion of the star are consistent with the previously known star S62, which is at a substantially larger physical distance, but in projection passes close to SgrA*. Observations in August and September 2019 easily detected S29, with K-magnitude of 16.6, at approximately 130 mas from SgrA*. The planned upgrades of GRAVITY, and further improvements in the calibration, hold the promise of finding stars fainter than magnitude 19 at K.

Respiratory motion complicates accurate irradiation of thoraco-abdominal tumors during radiotherapy, as treatment-system latency entails target-location uncertainties. This work addresses frame forecasting in chest and liver cine MRI to compensate for such delays. We investigate RNNs trained with online learning algorithms, enabling adaptation to changing respiratory patterns via on-the-fly parameter updates, and transformers, increasingly common in time-series forecasting for their ability to capture long-term dependencies. Experiments used 12 sagittal thoracic and upper-abdominal cine-MRI sequences from ETH Zürich and OvGU; the OvGU data exhibited higher motion variability, noise, and lower contrast. PCA decomposes the Lucas-Kanade optical-flow field into static deformation modes and low-dimensional, time-dependent weights. We compare various methods for forecasting these weights: linear filters, population and sequence-specific transformer encoders, and RNNs trained with real-time recurrent learning (RTRL), unbiased online recurrent optimization, decoupled neural interfaces, and sparse one-step approximation (SnAp-1). Predicted displacements were used to warp the reference frame and generate future images. Prediction accuracy decreased with the horizon h. Linear regression performed best at short horizons (1.3mm geometrical error at h=0.32s, ETH Zürich dataset), while RTRL and SnAp-1 outperformed the other algorithms at medium-to-long horizons, with geometrical errors below 1.4mm and 2.8mm on the sequences from ETH Zürich and OvGU, respectively. The sequence-specific transformer was competitive for low-to-medium horizons, but transformers remained overall limited by data scarcity and domain shift between datasets. Predicted frames visually resembled the ground truth, with notable errors occurring near the diaphragm at end-inspiration and regions affected by out-of-plane motion.

Modern distributed training relies heavily on communication compression to reduce the communication overhead. In this work, we study algorithms employing a popular class of contractive compressors in order to reduce communication overhead. However, the naive implementation often leads to unstable convergence or even exponential divergence due to the compression bias. Error Compensation (EC) is an extremely popular mechanism to mitigate the aforementioned issues during the training of models enhanced by contractive compression operators. Compared to the effectiveness of EC in the data homogeneous regime, the understanding of the practicality and theoretical foundations of EC in the data heterogeneous regime is limited. Existing convergence analyses typically rely on strong assumptions such as bounded gradients, bounded data heterogeneity, or large batch accesses, which are often infeasible in modern machine learning applications. We resolve the majority of current issues by proposing EControl, a novel mechanism that can regulate error compensation by controlling the strength of the feedback signal. We prove fast convergence for EControl in standard strongly convex, general convex, and nonconvex settings without any additional assumptions on the problem or data heterogeneity. We conduct extensive numerical evaluations to illustrate the efficacy of our method and support our theoretical findings.

Whole-body tracking has become the interface through which operators drive humanoid robots, yet the references it consumes are recorded on level ground and carrying nothing, so the tracker is aware of neither the forces the robot must exchange with objects nor the terrain it must stand on. Existing controllers address one side of this gap: force-capable policies command an end-effector force but prescribe no whole-body pose, while terrain-adaptive trackers treat loads as disturbances to reject rather than wrenches to command. We present BRACE, a whole-body tracker that exerts and compensates commanded hand forces from diverse poses while following a flat-ground reference on sloped terrain. Rather than leaving the tracker to absorb the load and the slope, BRACE folds both into the reference it follows: terrain conformance lifts footholds and root onto the local surface, and a wrench transformation resolves the hand displacement that produces a force jointly with the center-of-mass and center- of-pressure shifts it induces, bounded by teacher-specific arm-effort limits. Separate exertion and compensation teachers are distilled by DAgger into one flow-matching student that runs on proprioception alone, without a height map or measured wrench, so a teleoperator (even in remote locations) can supply a flat- ground trajectory and the robot resolves slope and load onboard. We extensive experiments on the Unitree-G1 to demonstrate the ability of BRACE to exert, compensate force and handle diverse terrain in simulation and real robot experiments.

Effective rehabilitation assessment is essential for monitoring patient progress, particularly in home-based settings. Existing systems often face challenges such as data imbalance and difficulty detecting subtle movement errors. This paper introduces Error-Guided Pose Augmentation (EGPA), a method that generates synthetic skeleton data by simulating clinically relevant movement mistakes. Unlike standard augmentation techniques, EGPA targets biomechanical errors observed in rehabilitation. Combined with an attention-based graph convolutional network, EGPA improves performance across multiple evaluation metrics. Experiments demonstrate reductions in mean absolute error of up to 27.6 percent and gains in error classification accuracy of 45.8 percent. Attention visualizations show that the model learns to focus on clinically significant joints and movement phases, enhancing both accuracy and interpretability. EGPA offers a promising approach for improving automated movement quality assessment in both clinical and home-based rehabilitation contexts.

Single-view mesh reconstruction predicts object meshes and spatial layouts from a single observation, making it attractive for fast robot spatial reasoning and real-to-sim digital twins. However, robot-mounted cameras naturally rotate during manipulation and navigation, while learned single-view reconstruction models often rely on view-dependent priors and may generalize poorly to out-of-distribution camera rotations. Such rotations can introduce 3D inconsistencies, incorrect layouts, and violations of physical constraints, but this failure mode remains under-evaluated. We introduce an evaluation protocol with controlled axis-wise roll, pitch, and yaw sweeps to trace errors in monocular depth estimation (MDE), canonical object meshes, camera-space layout, and physical plausibility within a representative SAM3D-style pipeline. On the Aria Digital Twin dataset and a real Franka wrist-camera sequence, camera rotations induce MDE distortion, layout drift, and collision penetration, while canonical mesh predictions remain relatively stable. A two-stage SAM3D+FoundationPose pipeline is more robust than one-stage feed-forward layout prediction, and our Gravity-Aware Refinement reduces one-stage pairwise ICP-based layout-orientation error by 47.1%. Our evaluation reveals that current single-view mesh reconstruction methods generalize poorly to robot camera rotation, and suggests that explicit gravity cues are important for reliable robotic single-view mesh reconstruction.

The mean Hawking flux does not determine how quantum stress fluctuations perturb a black-hole geometry. That information resides in field correlations, including vacuum contributions absent from the outgoing luminosity. Here we connect the complete exterior Unruh Wightman function to a finite-band stochastic reconstruction of Schwarzschild geometry. We retain the incoming vacuum and both outgoing frequency branches, form the connected stress covariance before angular projection, and propagate its monopole through a density-driven radial response. A shared Gaussian reconstruction then resolves how the value and derivative of the lapse control different geometric observables. For the specified covariance and noise amplitude, 2,200 realizations give relative widths of 0.0185 for the local horizon radius and 0.0483 for the surface-gravity temperature parameter, consistently across histograms and reconstruction checks. Covariance derivatives explain this unequal sensitivity. The construction separates the quantum-state input from the gravitational closure and spatial sampling assumptions, providing a reproducible finite-resolution description of how Hawking-field correlations affect horizon positions and surface-gravity statistics.

Unmanned vehicle navigation concerns estimating attitude, position, and linear velocity of the vehicle the six degrees of freedom (6 DoF). It has been known that the true navigation dynamics are highly nonlinear modeled on the Lie Group of SE_{2}(3). In this paper, a nonlinear filter for inertial navigation is proposed. The filter ensures systematic convergence of the error components starting from almost any initial condition. Also, the errors converge asymptotically to the origin. Experimental results validates the robustness of the proposed filter.

The Inversion-Denoising Paradigm, which is based on diffusion models, excels in diverse image editing and restoration tasks. We revisit its mechanism and reveal a critical, overlooked factor in reconstruction degradation: the approximate noise error. This error stems from approximating the noise at step t with the prediction at step t-1, resulting in severe error accumulation throughout the inversion process. We introduce Projection-Orthogonal Least Squares for Robust and Adaptive Inversion (POLARIS), which reformulates inversion from an error-compensation problem into an error-origin problem. Rather than optimizing embeddings or latent codes to offset accumulated drift, POLARIS treats the guidance scale ω as a step-wise variable and derives a mathematically grounded formula to minimize inversion error at each step. Remarkably, POLARIS improves inversion latent quality with just one line of code. With negligible performance overhead, it substantially mitigates noise approximation errors and consistently improves the accuracy of downstream tasks.

Learned simulators for deformable linear objects (DLOs) such as cables have to predict the motion of cables they were not trained on and stay stable over long rollouts. Most of their error occurs where the cable touches itself or the floor. Attention over all pairs of cable segments can represent contact between parts of the cable that are far apart along its length, but attention has no notion of geometry. A cable has two pairwise distances, which agree only while it is straight: the arc-length distance along the cable, which governs elastic forces, and the Euclidean distance in space, which governs contact. We add a physical attention bias, an additive term on the attention logits with a learned rate, and ask which distance it should use. We compare no bias, each distance alone, and both distances on disjoint sets of heads, keeping the rest of the model and the training protocol fixed. A physical bias improves prediction on unseen cables. The gain is largest when attention is the only mechanism that connects distant segments: there, the arc-length bias reduces prediction error by 15% and more than halves the drift in segment length. The Euclidean bias alone stays close to unbiased attention, while assigning both distances across heads is best or near-best on every metric we report. Code and per-run records: https://github.com/avihaig/dlogps.

We provide an algorithm for adaptive legged locomotion via online learning and model predictive control. The algorithm is composed of two interacting modules: model predictive control (MPC) and online learning of residual dynamics. The residual dynamics can represent modeling errors and external disturbances. We are motivated by the future of autonomy where quadrupeds will autonomously perform complex tasks despite real-world unknown uncertainty, such as unknown payload and uneven terrains. The algorithm uses random Fourier features to approximate the residual dynamics in reproducing kernel Hilbert spaces. Then, it employs MPC based on the current learned model of the residual dynamics. The model is updated online in a self-supervised manner using least squares based on the data collected while controlling the quadruped. The algorithm enjoys sublinear dynamic regret, defined as the suboptimality against an optimal clairvoyant controller that knows how the residual dynamics. We validate our algorithm in Gazebo and MuJoCo simulations, where the quadruped aims to track reference trajectories. The Gazebo simulations include constant unknown external forces up to 12g, where g is the gravity vector, in flat terrain, slope terrain with 20degree inclination, and rough terrain with 0.25m height variation. The MuJoCo simulations include time-varying unknown disturbances with payload up to 8~kg and time-varying ground friction coefficients in flat terrain.

Reliable odometry for legged robots without cameras or LiDAR remains challenging due to IMU drift and noisy joint velocity sensing. This paper presents a purely proprioceptive state estimator that uses only IMU and motor measurements to jointly estimate body pose and velocity, with a unified formulation applicable to biped, quadruped, and wheel-legged robots. The key idea is to treat each contacting leg as a kinematic anchor: joint-torque--based foot wrench estimation selects reliable contacts, and the corresponding footfall positions provide intermittent world-frame constraints that suppress long-term drift. To prevent elevation drift during extended traversal, we introduce a lightweight height clustering and time-decay correction that snaps newly recorded footfall heights to previously observed support planes. To improve foot velocity observations under encoder quantization, we apply an inverse-kinematics cubature Kalman filter that directly filters foot-end velocities from joint angles and velocities. The implementation further mitigates yaw drift through multi-contact geometric consistency and degrades gracefully to a kinematics-derived heading reference when IMU yaw constraints are unavailable or unreliable. We evaluate the method on four quadruped platforms (three Astrall robots and a Unitree Go2 EDU) using closed-loop trajectories. On Astrall point-foot robot~A, a sim200\,m horizontal loop and a sim15\,m vertical loop return with 0.1638\,m and 0.219\,m error, respectively; on wheel-legged robot~B, the corresponding errors are 0.2264\,m and 0.199\,m. On wheel-legged robot~C, a sim700\,m horizontal loop yields 7.68\,m error and a sim20\,m vertical loop yields 0.540\,m error. Unitree Go2 EDU closes a sim120\,m horizontal loop with 2.2138\,m error and a sim8\,m vertical loop with less than 0.1\,m vertical error. github.com/ShineMinxing/Ros2Go2Estimator.git

Autoregressive models accumulate error over long rollouts, yet at deployment there is no ground truth to measure it against. We train a single conditional latent diffusion model that steps a dynamical system forward or backward in time via a direction flag, and show that this bidirectionality supplies a measurement-free test-time error signal: rolling forward i steps and then backward i steps must return the model to its start, so the round-trip discrepancy C_i is a self-supervised proxy for the unobservable rollout error: no ensembles, no held-out data, no governing equations, for one extra rollout. We validate on compressible magnetohydrodynamics (MHD), an astrophysical turbulent radiative mixing layer, and natural face videos (CelebV-HQ). On held-out MHD trajectories, C_i ranks rollout error (Spearman 0.91-0.98 at fixed depth; 0.69 pm 0.16 within trajectories), and a simple calibrator fit on training rollouts predicts its magnitude to within 1.14times (68%) and 1.29times (95%) with near-nominal coverage - one nat beyond a depth-only predictor, transferring to all six decoded physical fields. The same signal flags the out-of-distribution Orszag-Tang vortex (AUROC 0.98; 1.0 by depth 10) exactly where sampling-dispersion baselines invert, and it cuts incurred error by 15% at 80% coverage - three times the depth-only baseline. Bidirectional training comes at negative cost, beating direction specialists in both directions, and the backward direction doubles as a fast inverse solver. On LE-PDE-UQ's turbulent Navier-Stokes benchmark, a single bidirectional model reaches accuracy within 1.3times of their ten-model ensemble at a tenth of the training cost, with the best training-free pixel-level calibration. Round-trip consistency turns reversibility into a practical trust signal for generative models.

Most 3D object generators focus on aesthetic quality, often neglecting physical constraints necessary in applications. One such constraint is that the 3D object should be self-supporting, i.e., remains balanced under gravity. Prior approaches to generating stable 3D objects used differentiable physics simulators to optimize geometry at test-time, which is slow, unstable, and prone to local optima. Inspired by the literature on aligning generative models to external feedback, we propose Direct Simulation Optimization (DSO), a framework to use the feedback from a (non-differentiable) simulator to increase the likelihood that the 3D generator outputs stable 3D objects directly. We construct a dataset of 3D objects labeled with a stability score obtained from the physics simulator. We can then fine-tune the 3D generator using the stability score as the alignment metric, via direct preference optimization (DPO) or direct reward optimization (DRO), a novel objective, which we introduce, to align diffusion models without requiring pairwise preferences. Our experiments show that the fine-tuned feed-forward generator, using either DPO or DRO objective, is much faster and more likely to produce stable objects than test-time optimization. Notably, the DSO framework works even without any ground-truth 3D objects for training, allowing the 3D generator to self-improve by automatically collecting simulation feedback on its own outputs.

Prior work has shown that fine-tuning models on a narrow domain with misaligned data can lead to broad misalignment - a phenomenon termed "emergent misalignment" (Betley et al. 2025). While all tested models were susceptible to emergent misalignment, some models showed more resistance than others. Specifically the Qwen-2.5 family proved to be relatively resistant, while GPT-4o exhibited the strongest misalignment. In this paper we evaluate if current-generation open-weights models exhibit similar resistance to the Qwen-2.5 family and measure misalignment robustness over a range of model architectures and scales. We replicate the effect across nine modern open-weights models (Gemma 3 and Qwen 3 families, 1B-32B parameters). Models fine-tuned on insecure code generation show a 0.68% misalignment rate (compared to 0.07% for base models), matching the lower end of prior open-model results but dramatically lower than GPT-4o's 20%. We identify a critical format-dependent vulnerability: requiring JSON output doubles misalignment rates compared to natural language prompts (0.96% vs 0.42%). This suggests that structural constraints may bypass safety training by reducing the model's 'degrees of freedom' to refuse. These findings confirm emergent misalignment as a reproducible phenomenon in modern open-weights models, with rates substantially lower than observed in proprietary systems.

In challenging terrains, constructing structures such as antennas and cable-car masts often requires the use of helicopters to transport loads via ropes. The swinging of the load, exacerbated by wind, impairs positioning accuracy, therefore necessitating precise manual placement by ground crews. This increases costs and risk of injuries. Challenging this paradigm, we present Geranos: a specialized multirotor Unmanned Aerial Vehicle (UAV) designed to enhance aerial transportation and assembly. Geranos demonstrates exceptional prowess in accurately positioning vertical poles, achieving this through an innovative integration of load transport and precision. Its unique ring design mitigates the impact of high pole inertia, while a lightweight two-part grasping mechanism ensures secure load attachment without active force. With four primary propellers countering gravity and four auxiliary ones enhancing lateral precision, Geranos achieves comprehensive position and attitude control around hovering. Our experimental demonstration mimicking antenna/cable-car mast installations showcases Geranos ability in stacking poles (3 kg, 2 m long) with remarkable sub-5 cm placement accuracy, without the need of human manual intervention.

Most Bundle Adjustment (BA) solvers like the Levenberg-Marquardt algorithm require a good initialization. Instead, initialization-free BA remains a largely uncharted territory. The under-explored Variable Projection algorithm (VarPro) exhibits a wide convergence basin even without initialization. Coupled with object space error formulation, recent works have shown its ability to solve small-scale initialization-free bundle adjustment problem. To make such initialization-free BA approaches scalable, we introduce Power Variable Projection (PoVar), extending a recent inverse expansion method based on power series. Importantly, we link the power series expansion to Riemannian manifold optimization. This projective framework is crucial to solve large-scale bundle adjustment problems without initialization. Using the real-world BAL dataset, we experimentally demonstrate that our solver achieves state-of-the-art results in terms of speed and accuracy. To our knowledge, this work is the first to address the scalability of BA without initialization opening new venues for initialization-free structure-from-motion.

Operator-learning benchmarks ship as full-precision arrays, and they have grown to terabyte scale. A curator who wants to distribute one has to decide how coarsely to store it. That decision is usually made by fixing a tolerance on the reconstruction error of the stored field. We show that this quantity is measured in the wrong place. It compares the stored field with the original, before any model is trained. What the curator is buying is the accuracy of a model trained on the compressed copy, and the two can disagree: two PDEBench families stored to identical field error differ threefold downstream. A solution operator smooths, so only part of the codec error ever reaches the model's output. That part can be measured. Push a compressed field through a model already trained at full precision, and compare its output against the output on the clean field. The measurement costs forward passes and no training on compressed data. It spans more than two orders of magnitude across six PDE families, and it orders downstream cost where field error does not, inverting 12 of 104 cross-dataset comparisons against field error's 36. Read as a budget, the same curve nominates a storage rate for each dataset. A back-check against trained models finds those rates wrong in both directions by up to a factor of two in stored bits.

A stochastic gravitational wave background causes the apparent positions of distant sources to fluctuate, with angular deflections of order the characteristic strain amplitude of the gravitational waves. These fluctuations may be detectable with high precision astrometry, as first suggested by Braginsky et al. in 1990. Several researchers have made order of magnitude estimates of the upper limits obtainable on the gravitational wave spectrum \Omega_gw(f), at frequencies of order f ~ 1 yr^-1, both for the future space-based optical interferometry missions GAIA and SIM, and for VLBI interferometry in radio wavelengths with the SKA. For GAIA, tracking N ~ 10^6 quasars over a time of T ~ 1 yr with an angular accuracy of \Delta \theta ~ 10 \mu as would yield a sensitivity level of \Omega_gw ~ (\Delta \theta)^2/(N T^2 H_0^2) ~ 10^-6, which would be comparable with pulsar timing. In this paper we take a first step toward firming up these estimates by computing in detail the statistical properties of the angular deflections caused by a stochastic background. We compute analytically the two point correlation function of the deflections on the sphere, and the spectrum as a function of frequency and angular scale. The fluctuations are concentrated at low frequencies (for a scale invariant stochastic background), and at large angular scales, starting with the quadrupole. The magnetic-type and electric-type pieces of the fluctuations have equal amounts of power.

We present a new method for measuring the E_G statistic that combines two CMB secondaries -- the kinematic Sunyaev-Zeldovich (kSZ) effect and CMB lensing -- for the first time to probe gravity on linear scales. The E_G statistic is a discriminating tool for modified gravity theories, which leave imprints in lensing observables and peculiar velocities. Existing E_G measurements rely on redshift space distortions (RSD) to infer the velocity field. Here, we employ kSZ velocity-reconstruction instead of RSD, a complementary technique that constrains the largest-scale modes better than the galaxy survey it uses. We construct a novel V_G estimator that involves a ratio between cross-correlations of a galaxy sample with a CMB convergence map and that with a 3D kSZ-reconstructed velocity field. We forecast for current and upcoming CMB maps from the Atacama Cosmology Telescope (ACT) and the Simons Observatory (SO), respectively, in combination with three spectroscopic galaxy samples from the Dark Energy Spectroscopic Instrument (DESI). We find cumulative detection significances in the range S/N sim 20-55, which can robustly test the scale-independent E_G prediction under general relativity (GR) at different effective redshifts of the galaxy samples (zapprox 0.73, 1.33, 1.84). In particular, the SOtimesDESI LRG measurement would be able to distinguish between GR and certain modified gravity models, including Hu-Sawicki f(R) and Chameleon theories, with high confidence. The proposed V_G estimator opens up a new avenue for stress-testing gravity and the LambdaCDM+GR model at the largest observable scales.