Daily Papers

One-proton emission is a direct probe of nuclear structure near the proton drip line and plays a critical role in understanding exotic decay modes and nucleosynthesis processes. In this study, we investigate the half-lives of one-proton emitters for 71 leq Z leq 83 odd-Z nuclei by employing the WKB approximation with nuclear potentials obtained from the deformed relativistic Hartree-Bogoliubov theory in continuum (DRHBc) and, for comparison, the relativistic continuum Hartree-Bogoliubov theory (RCHB). We first compare the calculated half-lives with available experimental data. The inclusion of quadrupole deformation via the DRHBc hardly contributes to improving the predictions of half-lives for the deformed nuclei. We find that all the studied nuclei exhibit ground states with |β_{2,{rm DRHBc}}| < 0.15, and within this limited deformation range the spectroscopic factor provides the dominant contribution to the half-life, compared to the decay width. In particular, for nuclei exhibiting shape coexistence in DRHBc, such as ^{170}Au, where the half-life varies significantly with the quadrupole deformation through its effect on the spectroscopic factor, we expect shape coexistence to exert a substantial influence on the variation of half-lives. Finally, we discuss the half-lives in consideration of shape coexistence. Our results indicate that the calculated half-life is governed not by the total-energy difference between coexisting minima but rather by the spectroscopic factor influenced by the deformation.

Quorum sensing (QS) is classically understood as a mechanism by which bacterial cells sense their own density, but environmental fluctuations make any single cell's estimate unreliable. An alternative view holds that populations pool individual estimates to reach reliable collective decisions. We investigate how a two-autoinducer toggle switch network enables this collective adaptation in fluctuating environments. At the single-cell level, the toggle switch is bistable. Membrane permeability controls autoinducer secretion and is the evolving trait. Using an individual-based model of a spatially structured population, we show that permeability evolves through a collective mechanism. Environmental frequency is the primary determinant of evolutionary outcome. Under strong asymmetry, the dominant trait reaches a high plateau. The trait linked to the rare environment stays low. It rises smoothly as its environment becomes more frequent. Total permeability stays close to a fixed budget; environmental frequency mainly sets how it is split between the two traits. When the two environments are equally frequent, no single trait wins. Both traits coexist, and noise asymmetry between the two sensing channels biases the levels at which they coexist rather than selecting a winner. Coexistence is also the slowest outcome to reach. Higher noise speeds adaptation, but the evolved permeability is non-monotonic in noise, peaking at an intermediate value. Earlier work found that more noise favors collective sensing as long as cells are correct on average. We develop a two-trait adaptive-dynamics model that unifies these regimes. Away from symmetry, it reduces to a closed one-dimensional equation that captures the individual-based results. At symmetry, weak cross-repression gives a single coexistence attractor, consistent with replicate populations maintaining both traits.

We derive an expression for the variation between parallel trajectories in phenotypic evolution, extending the well known result that predicts the mean evolutionary path in adaptive dynamics or quantitative genetics. We show how this expression gives rise to the notion of fluctuation domains - parts of the fitness landscape where the rate of evolution is very predictable (due to fluctuation dissipation) and parts where it is highly variable (due to fluctuation enhancement). These fluctuation domains are determined by the curvature of the fitness landscape. Regions of the fitness landscape with positive curvature, such as adaptive valleys or branching points, experience enhancement. Regions with negative curvature, such as adaptive peaks, experience dissipation. We explore these dynamics in the ecological scenarios of implicit and explicit competition for a limiting resource.

Creating novel images by fusing visual cues from multiple sources is a fundamental yet underexplored problem in image-to-image generation, with broad applications in artistic creation, virtual reality and visual media. Existing methods often face two key challenges: coexistent generation, where multiple objects are simply juxtaposed without true integration, and bias generation, where one object dominates the output due to semantic imbalance. To address these issues, we propose Visual Mixing Diffusion (VMDiff), a simple yet effective diffusion-based framework that synthesizes a single, coherent object by integrating two input images at both noise and latent levels. Our approach comprises: (1) a hybrid sampling process that combines guided denoising, inversion, and spherical interpolation with adjustable parameters to achieve structure-aware fusion, mitigating coexistent generation; and (2) an efficient adaptive adjustment module, which introduces a novel similarity-based score to automatically and adaptively search for optimal parameters, countering semantic bias. Experiments on a curated benchmark of 780 concept pairs demonstrate that our method outperforms strong baselines in visual quality, semantic consistency, and human-rated creativity.

3D shape generation aims to produce innovative 3D content adhering to specific conditions and constraints. Existing methods often decompose 3D shapes into a sequence of localized components, treating each element in isolation without considering spatial consistency. As a result, these approaches exhibit limited versatility in 3D data representation and shape generation, hindering their ability to generate highly diverse 3D shapes that comply with the specified constraints. In this paper, we introduce a novel spatial-aware 3D shape generation framework that leverages 2D plane representations for enhanced 3D shape modeling. To ensure spatial coherence and reduce memory usage, we incorporate a hybrid shape representation technique that directly learns a continuous signed distance field representation of the 3D shape using orthogonal 2D planes. Additionally, we meticulously enforce spatial correspondences across distinct planes using a transformer-based autoencoder structure, promoting the preservation of spatial relationships in the generated 3D shapes. This yields an algorithm that consistently outperforms state-of-the-art 3D shape generation methods on various tasks, including unconditional shape generation, multi-modal shape completion, single-view reconstruction, and text-to-shape synthesis.

Measuring geometric similarity between high-dimensional network representations is a topic of longstanding interest to neuroscience and deep learning. Although many methods have been proposed, only a few works have rigorously analyzed their statistical efficiency or quantified estimator uncertainty in data-limited regimes. Here, we derive upper and lower bounds on the worst-case convergence of standard estimators of shape distancex2014a measure of representational dissimilarity proposed by Williams et al. (2021).These bounds reveal the challenging nature of the problem in high-dimensional feature spaces. To overcome these challenges, we introduce a new method-of-moments estimator with a tunable bias-variance tradeoff. We show that this estimator achieves substantially lower bias than standard estimators in simulation and on neural data, particularly in high-dimensional settings. Thus, we lay the foundation for a rigorous statistical theory for high-dimensional shape analysis, and we contribute a new estimation method that is well-suited to practical scientific settings.

Classical robot ethics is often framed around obedience, most famously through Asimov's laws. This framing is too narrow for contemporary AI systems, which are adaptive, generative, embodied, and embedded in physical, psychological, and social worlds. We argue that future human-AI relations should be understood not as master-tool obedience, but as conditional mutualism under governance: a co-evolutionary relationship in which humans and AI systems can develop, specialize, and coordinate while institutions keep the relation reciprocal, reversible, psychologically safe, and socially legitimate. We synthesize concepts from computability, machine learning, foundation models, embodied AI, alignment, human-robot interaction, ecological mutualism, coevolution, and polycentric governance. We then formalize coexistence as a multiplex dynamical system across physical, psychological, and social layers, with reciprocal supply-demand coupling, conflict penalties, developmental freedom, and governance regularization. The model gives conditions for existence, uniqueness, and global asymptotic stability of equilibria. Deterministic ODE simulations, basin sweeps, sensitivity analyses, governance-regime comparisons, shock tests, and local stability checks show that governed mutualism reaches high coexistence with zero domination, while absent or excessive governance can produce domination, weak-benefit lock-in, or suppressed development. The results suggest that human-AI coexistence should be designed as a co-evolutionary governance problem, not a one-shot obedience problem.

Generating complete 3D assets from sparse, unposed images requires preserving observed geometry while completing unseen regions. Joint reconstruction and generation offers a way to address both goals: reconstruction recovers the geometry observed in the input images, while generation contributes learned shape priors. However, combining camera-relative reconstruction with canonical-space generation introduces a coordinate mismatch that makes direct geometric interaction more difficult. Moreover, conditioning each 3D location on all views without accounting for their relevance may mix useful geometric evidence with unrelated image content, hindering local detail recovery. We present UniForge3D, which jointly models reconstruction and generation in a shared anchor-guided space, resolving their coordinate mismatch. This space follows the anchor view's azimuth while keeping the object upright. The two branches exchange features bidirectionally to predict per-view point maps and a complete sparse voxel structure. We further condition point-map prediction on the generated structure to establish pixel-to-voxel correspondences and select the most informative input view for each voxel. Features from the selected views then guide detailed shape generation, helping preserve observed geometric details. Our method achieves state-of-the-art appearance and geometry results on Toys4K and GSO, generating complete 3D assets with improved fidelity. Project webpage: https://xishuxishu.github.io/uniforge3d-project/

Entropically driven fluid-solid transitions in monodisperse, purely repulsive hard spheres (MPRHS) are well established in theory, simulation, and experiment for atomic and colloidal systems. For MPRHS, however, coexistence is usually located via bulk free-energy calculations; the underlying microscopic balance between configurational and vibrational entropy is left implicit. Frenkel clarified this mechanism explicitly as an exchange of long-range configurational entropy for short-range vibrational entropy, but in the pristine MPRHS limit the nucleation barrier near coexistence is so high that phase separation is predicted only on astronomical time scales. Consistent with this, even unbiased simulations do not show spontaneous, equilibrium fluid-crystal coexistence; transient mixtures are mostly overtaken by a single phase; observed coexistence is still algorithmically-driven. Nearly hard-sphere colloid experiments do observe fluid-crystal coexistence, but always in the presence of unavoidable triggers such as gravity, walls, and polydispersity. We treat the hard-sphere phase diagram as settled and ask how the entropic exchange mechanism can be revealed in nearly hard-sphere colloidal simulations. We probe the mechanism on finite time scales by introducing minimal perturbations that trigger phase separation: small reductions in hardness that increase locally accessible free volume (and thus gently increase vibrational entropy), and 2-4% distributed crystal seeds. These perturbations produce coexisting fluid and crystal domains with crystal fraction, phase envelope and osmotic pressure that, with systematically increasing particle hardness, approach the hard-sphere limit. These results demonstrate that slight enhancements to vibrational entropy provide a dynamically accessible route to realizing the long-range/short-range entropy exchange required for phase separation.

Pairwise compatibility calculation is at the core of most fragments-reconstruction algorithms, in particular those designed to solve different types of the jigsaw puzzle problem. However, most existing approaches fail, or aren't designed to deal with fragments of realistic geometric properties one encounters in real-life puzzles. And in all other cases, compatibility methods rely strongly on the restricted shapes of the fragments. In this paper, we propose an efficient hybrid (geometric and pictorial) approach for computing the optimal alignment for pairs of fragments, without any assumptions about their shapes, dimensions, or pictorial content. We introduce a new image fragments dataset generated via a novel method for image fragmentation and a formal erosion model that mimics real-world archaeological erosion, along with evaluation metrics for the compatibility task. We then embed our proposed compatibility into an archaeological puzzle-solving framework and demonstrate state-of-the-art neighborhood-level precision and recall on the RePAIR 2D dataset, directly reflecting compatibility performance improvements.

Memory systems can store vastly different amounts of information despite similar hardware constraints. Here, we show that superior spatial memory emerges from a discrete stiffening of hippocampal population geometry-a transition from disorganized to crystalline collective coding. Comparing food-caching chickadees to non-caching zebra finches, we found that the caching hippocampus maintains a topologically rigid, "crystalline" geometry with significantly higher geometric stability (Shesha 0.245 v 0.166) and nearly two-fold greater temporal coherence (Shesha 0.393 v 0.209), while the non-caching hippocampus resembles a disorganized "mist." This stability is actively constructed by synergistic circuit dynamics: excitatory neurons form the spatial scaffold while inhibitory populations contribute orthogonal decorrelation, a circuit motif in which excitatory and inhibitory populations occupy largely non-overlapping representational subspaces. A double dissociation with Valiant's Stable Memory Allocator, a model predicting that dedicated neuron ensembles underlie each memory, confirms this advantage reflects continuous topological organization rather than discrete neuron allocation: caching networks exhibit near-zero split-half allocation reliability despite their geometric superiority. Computational modeling across 10k configurations reveals topological rigidity as the mathematical prerequisite for scale: crystalline codes sustain high-fidelity readout beyond M=1k locations while mist codes fail below M=10, a >100-fold capacity advantage. This capacity requires a 169fold representational redundancy: a "geometric tax" stabilizing the manifold against biological noise. These results establish geometric stability as a candidate organizing principle of biological memory: evolution achieves high-capacity memory not by proliferating neurons, but by engineering the geometry of the neural code itself.

Standard training metrics like loss fail to explain the emergence of complex capabilities in large language models. We take a spectral approach to investigate the geometry of learned representations across pretraining and post-training, measuring effective rank (RankMe) and eigenspectrum decay (α-ReQ). With OLMo (1B-7B) and Pythia (160M-12B) models, we uncover a consistent non-monotonic sequence of three geometric phases during autoregressive pretraining. The initial "warmup" phase exhibits rapid representational collapse. This is followed by an "entropy-seeking" phase, where the manifold's dimensionality expands substantially, coinciding with peak n-gram memorization. Subsequently, a "compression-seeking" phase imposes anisotropic consolidation, selectively preserving variance along dominant eigendirections while contracting others, a transition marked with significant improvement in downstream task performance. We show these phases can emerge from a fundamental interplay of cross-entropy optimization under skewed token frequencies and representational bottlenecks (d ll |V|). Post-training further transforms geometry: SFT and DPO drive "entropy-seeking" dynamics to integrate specific instructional or preferential data, improving in-distribution performance while degrading out-of-distribution robustness. Conversely, RLVR induces "compression-seeking", enhancing reward alignment but reducing generation diversity.

Large language models place structured concepts on geometrically faithful manifolds: weekdays lie on a circle, months on another, usually taken to be a fixed world-model the network stores and looks up. We show that context is king: the structure a model actually uses is set by the in-context specification. A declarative rule fixes not only which relations the geometry encodes but its topology type: the same tokens form a cycle or a branching tree on command, built even on arbitrary, meaning-free tokens with no prior to inherit, which a relabeled stored shape cannot do. When the specification conflicts with a strong pretrained prior, the context-set geometry dominates it in capable models, read from the same activations (representational similarity 0.6--0.9 to the imposed structure versus near-zero to the prior), across the priors we test and both families we study (Gemma, Qwen). Activation patching shows the map is causally used, not a probe correlate: swapping one entity's activation for another's makes the model answer with the other entity's successor under the imposed order. A rough map forms readily, present even in small and base models; what scale gates is using it cleanly: clean dominance and the causal crossover emerge only in the larger models (up to Gemma-31B and Qwen-27B) and weaken or reverse below, so a mechanism present in a large model can be absent in a smaller one of the same family. Whether the model builds this geometry anew or reconfigures a stored one we leave open; operationally, the geometry it uses is the one the context specifies.

Generating a street-level 3D scene from a single satellite image is a crucial yet challenging task. Current methods present a stark trade-off: geometry-colorization models achieve high geometric fidelity but are typically building-focused and lack semantic diversity. In contrast, proxy-based models use feed-forward image-to-3D frameworks to generate holistic scenes by jointly learning geometry and texture, a process that yields rich content but coarse and unstable geometry. We attribute these geometric failures to the extreme viewpoint gap and sparse, inconsistent supervision inherent in satellite-to-street data. We introduce Sat3DGen to address these fundamental challenges, which embodies a geometry-first methodology. This methodology enhances the feed-forward paradigm by integrating novel geometric constraints with a perspective-view training strategy, explicitly countering the primary sources of geometric error. This geometry-centric strategy yields a dramatic leap in both 3D accuracy and photorealism. For validation, we first constructed a new benchmark by pairing the VIGOR-OOD test set with high-resolution DSM data. On this benchmark, our method improves geometric RMSE from 6.76m to 5.20m. Crucially, this geometric leap also boosts photorealism, reducing the Fréchet Inception Distance (FID) from sim40 to 19 against the leading method, Sat2Density++, despite using no extra tailored image-quality modules. We demonstrate the versatility of our high-quality 3D assets through diverse downstream applications, including semantic-map-to-3D synthesis, multi-camera video generation, large-scale meshing, and unsupervised single-image Digital Surface Model (DSM) estimation. The code has been released on https://github.com/qianmingduowan/Sat3DGen.

Monodisperse, purely repulsive, hard spheres (MPRHS) are an important model system for mechanistically exploring phase behavior in atomic systems and colloids. Since the 1940s, phase transitions in these systems have been obtained via simulation, theory, and experiments. But there is a gap in this literature: despite decades of reports of phase transition from one pure state to another, no computational studies report spontaneous phase separation into coexisting domains of liquid and crystal regions. This gap owes its origin to the underlying mechanism of entropically-driven phase separation in MPRHS - the competition between short-range entropy and long-range entropy. Frenkel proposed that spontaneous phase separation in simulations of up to 1,000,000 particles would require more than 317,000,000 years to sample enough microstates to converge to phase separated macrostate. Some brute-force simulations do show brief spontaneous coexistence but a metastable crystal or fluid subsequently overtakes the system. To bypass these difficulties, many studies use seeding, gravity, or direct construction of liquid and solid phases to study interfacial energy and nucleation rates of MPRHS systems. WCA potentials have also been used to bypass metastability, where softness provides free volume, lowers osmotic pressure and the energy barrier. It is argued that the transition path taken in bypassing metastability is mechanistically the same as without triggers. But as acknowledged by Alder & Wainwright, explicit observation of spontaneous coexistence is central to computational prediction of first-order transition. Such observation would provide satisfying demonstration of Frenkel's entropy exchange mechanism. We explore literature revealing these interesting behaviors and conclude that computational demonstration of Frenkel's mechanism for MPRHS awaits large systems with careful hardness perturbations.

We update predictions for observables in the "delicate" D3/anti-D3 inflationary model on the conifold. We use a full CMB likelihood calculation to assess goodness-of-fit, which is necessary because in this model the zeta power spectrum often cannot be modelled as a power-law over observable scales. For the first time we are able to provide accurate forecasts for the amplitude of three-point correlations. In a significant portion of its parameter space the model follows Maldacena's single-field prediction fNL ~ -(5/12)(ns-1) if nt << 1. Therefore |fNL| is usually small when the power spectrum satisfies observational constraints. In a small number of cases the bispectrum is instead dominated by effects from rapid switching between angular minima. The resulting amplitudes are larger, but mostly with unacceptable spectral behaviour. In the most extreme case we obtain |fNLeq| ~ 75 at kt/3 = 0.002/Mpc. It has been suggested that the quasi-single field inflation ("QSFI") mechanism could produce significant 3-point correlations in this model. We do observe rare shifts in amplitude between equilateral and squeezed configurations that could possibly be associated with QSFI effects, but more investigation is needed to establish the full bispectrum shape. There is evidence of "shape" running between equilateral and squeezed configurations that may be inherited from the scale dependence of the spectrum. We explore the dependence of observables on discrete choices such as the truncation point of the potential. Our analysis illustrates the advantages of a standard format for information exchange within the inflationary model-building and testing community.

Metamaterials are artificially engineered structures whose mechanical and physical behaviors are strongly shaped by geometry rather than composition. Voxel representation provides a unified format for metamaterial geometry generation, as it can express diverse classes such as truss, shell, and porous structures within a single cubic discretization. However, voxel-based generation faces a plausibility-novelty trade-off: staying close to known geometries helps preserve geometric regularities, while moving away from them is necessary for novelty but may produce degenerate geometries. To address this challenge, we propose REGDIFF, a generative framework that couples voxel representation with latent space regulation and guided diffusion. REGDIFF introduces a repel-and-sink (RAS) mechanism to smooth the latent distribution of plausible geometries, and short-range repulsion (SRR) guidance to discourage generation overly close to known samples while maintaining geometric plausibility. We further contribute a voxel-based benchmark covering truss- and shell-type metamaterial geometries, together with an evaluation module for geometric plausibility, novelty, and diversity. Experiments show that REGDIFF outperforms voxel-based generative baselines, achieving +8.9% in geometric plausibility, +46.4% in novelty, and +128.6% in diversity on average across two datasets. These results suggest that REGDIFF is a strong geometry candidate generator for downstream evaluation. Our code is provided at https://github.com/wzhan24/ReGDiff.

"Theory figures" are a staple of theoretical visualization research. Common shapes such as Cartesian planes and flowcharts can be used not only to explain conceptual contributions, but to think through and refine the contribution itself. Yet, theory figures tend to be limited to a set of standard shapes, limiting the creative and expressive potential of visualization theory. In this work, we explore how the shapes used in theory figures afford different understandings and explanations of their underlying phenomena. We speculate on the value of visualizing theories using more expressive configurations, such as icebergs, horseshoes, M\"obius strips, and BLT sandwiches. By reflecting on figure-making's generative role in the practice of theorizing, we conclude that theory is, in fact, shapes.